Shop our Airplanes Products Drone Products Sales
Thread Tools
Jul 08, 2004, 07:46 PM
Registered User
MikeScag's Avatar

E-zipper : kicken it up a notch

I'm contemplating the following power system upgrade for an E-zipper:

10xKAN 1050's driving a Promax 4011, spining an APC 5x3 direct. P-Calc shows the system drawing 20 static amps. WIth the 5x3, I'll get a similar top end pitch speed of 76 mph, but in flight thrust almost doubles, and static thrust is up nicely also.

I've read about others using the 4011 on ducted fans on 10 cells, and I'm wondering if it will hold together pushing a smaller prop.

Any ideas?
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Theraforming zepron..Lets kick it up a Notch aerogel Scratchbuilt Indoor and Micro Models 202 Jun 07, 2014 02:06 PM
E-Zipper : Kickin it up (Cross posting) MikeScag Foamies (Kits) 0 Jul 08, 2004 07:48 PM is up and running Splash Product Announcements 6 Jun 28, 2003 06:22 PM
Voyager E - Brushless set-up, almost..! DaveRC Electric Heli Talk 7 Dec 02, 2001 10:43 PM
My E-Bandit site is up.... Haldor Electric Ducted Fan Jet Talk 25 Jul 27, 2001 01:39 AM