Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by billpa, who may elect to delete unwanted replies.
May 01, 2018, 11:43 PM
Registered User
Hi all ,

Quick question... is the Vector compatible with BL-heli_s esc's with dshot or one shot. Just finished rebuilding my QAV500 with a naza mV2 FC... placed a new set of BL_Heli esc's jn the rebuild and found out on completion that Naza doesnt support it.....only SimonK. I know its 40-50 bucks for new ESC's but I'm so tired of DJI proprietary options and slow Tech upgrades.

Thanks
Sign up now
to remove ads between posts
May 09, 2018, 12:30 AM
Registered User
Quote:
Originally Posted by cswann821
Hi all ,

Quick question... is the Vector compatible with BL-heli_s esc's with dshot or one shot. Just finished rebuilding my QAV500 with a naza mV2 FC... placed a new set of BL_Heli esc's jn the rebuild and found out on completion that Naza doesnt support it.....only SimonK. I know its 40-50 bucks for new ESC's but I'm so tired of DJI proprietary options and slow Tech upgrades.

Thanks
The vector works great with my bl-heli ESCs on oneshot 125.


I am wondering if there is any way to get better low throttle/no throttle performance? Maybe something similar to air mode? With a little bit of tuning i have my 8 inch 1kg quad flying acro great, the only down side I am experiencing is the extremely sloppy performance at really low throttle settings, such as when diving down a cliff. Some small idle speed adjustments haven't made a big difference. Any setup advice? Future firmware updates maybe?


Quick Reply
Message:

Thread Tools