Thread Tools
This thread is privately moderated by birdie_in_texas, who may elect to delete unwanted replies.
Jul 20, 2015, 08:58 PM
Pro Bro #1008
birdie_in_texas's Avatar
Thread OP
Discussion

Big quad going up on the chopping block


here is the "big" quad..
Last edited by birdie_in_texas; Jul 23, 2015 at 07:55 PM.
Sign up now
to remove ads between posts
Jul 20, 2015, 09:15 PM
Pro Bro #1008
birdie_in_texas's Avatar
Thread OP
Diatone White Sheep with integrated pcb.
Castle Creation 25 ESC's
2212-930 motors with 9x4.7 on 4S (mucho balls!)
Immersion RC 600mw video transmitter
700TVL Sony fpv camera
CC3D flight controller

I would prefer to keep the spektrum satellite, but not a deal breaker..
Last edited by birdie_in_texas; Jul 23, 2015 at 07:57 PM.
Jul 23, 2015, 08:01 PM
Registered User
I like it!! id like to keep my spectrum satellite as well lol. im up for an even trade if you are up for it
Jul 23, 2015, 08:02 PM
Registered User
what size 4s were you running on it?
Jul 23, 2015, 08:05 PM
Pro Bro #1008
birdie_in_texas's Avatar
Thread OP
it is a 4S 2650..

you need it?

i was looking, and it is way better if this satellite stays on the quad..

once you see it, you will understand
Jul 23, 2015, 08:06 PM
Pro Bro #1008
birdie_in_texas's Avatar
Thread OP
the CC3D flight controller powers the satellite so i had to cut/solder wires etc, as it needs 3.3V and it is pretty much permanent

if you need to keep yours on the slick, then go ahead, i will find something later i guess sir..
Jul 23, 2015, 08:16 PM
Pro Bro #1008
birdie_in_texas's Avatar
Thread OP
I will show you and get you a link to the software..it is a little bit of a chore, but in 10 minutes you will have it all bound and working good..


where you wanna meet?
Jan 22, 2016, 12:14 AM
Registered User
Hey im new to here. I see you like guns. I work at a gunstore in Georgia. any way I was reading some of your blogs and need help you seem like you know what your are doing. I just bought my first quad. I ordered a dx6i radio and ar6200 receivers but now Im reading people having trouble with them. Do you have a suggestion or maybe even a receiver I can buy from you that will work with the dx6i reliably


Quick Reply
Message:
Thread Tools