Thread Tools
This thread is privately moderated by Michael763, who may elect to delete unwanted replies.
Jul 18, 2015, 09:39 PM
Registered User
Thread OP
Build Log

Puddle Twin 29 7/8"

I printed out plans and cut out the parts for a 29 7/8" wing span version of the Puddle Twin. I really liked the lines of both the Puddle Twin and the Puddle Twin XL. I decide to start with the Puddle Twin and incorporate almost all of the updates recommended by Dieter W on into my build. I used Dieter W pictures that he posted on because of the quality of his pictures and ideas.

I thought that I had posted all these pictures back in February. However, when I got asked for an update in the Depron Puddle Twin thread I realized that I had not.

My Puddle Twin has been waiting since February on the back burner. However, it is ready for the plastic or fiberglass reinforcement on the bottom, servos, motors, and motor mounts to be installed. I received the motors in the mail last week. After that it will be time for some color and flight.
Sign up now
to remove ads between posts

Quick Reply
Thread Tools