Thread Tools
This thread is privately moderated by Thunder50BMG, who may elect to delete unwanted replies.
Jul 01, 2015, 10:59 AM
Registered User
Thunder50BMG's Avatar
Thread OP
Build Log

Halfmoon 2x4 aluminum version


Here is a ALL Aliminum frame version of my ORIGINAL configuration/mixes HALFMOON 2X4. Fitted with twin metal servos for max. agility and fun.

With RC911 V1.6++ R4 Fw , it's now ACRO Able machine.

Here are some close-up pix of the MAIN Frame with NO electronics to show it clearly.

It's flying pretty good and 100% met my flying style.

SPECS:
KK2.1.5 RC911 V1.6++ R4 FW / TURNIGY D2830/11 1000Kv motors / HK 20A Simon K Esc's / TGY 225MG Digital metal gears servos / Scratchmade yaw system / Flying with 4S 2200Mah ZIPPY Lipo / Manually cut Aluminum double frame
Last edited by Thunder50BMG; Jul 01, 2015 at 12:39 PM. Reason: coco
Sign up now
to remove ads between posts
Jul 01, 2015, 11:01 AM
Registered User
Thunder50BMG's Avatar
Thread OP
....and the maiden acro video


HALFMOON VERSION 2 * ALL ALUMINUM FRAME * MAIDEN*2X4 (3 min 21 sec)
Jul 01, 2015, 12:58 PM
Registered User
Chippi,
Nice job on the frame. Where do you get the servo motor mounts and how do you like them?
So...Acro is you new addition? LOL
Jul 01, 2015, 01:28 PM
Registered User
Thunder50BMG's Avatar
Thread OP
Quote:
Originally Posted by drpopp64
Chippi,
Nice job on the frame. Where do you get the servo motor mounts and how do you like them?
So...Acro is you new addition? LOL
Thanks Don !
My original Halfmoon Quad has not been tested for acro flying until I was introduced to RC911 fw , I really think we can do acro on everything considering the weight of the unit to recover BUT, ALL the Halfmoon out there DON'T have his FW so,I really don't recommend flying acro with them OR NOT UNLESS they know what they are doing.
I will pm you the link of the part that I used on the servo motor mount.
Jul 14, 2015, 10:03 PM
Registered User
Thunder50BMG's Avatar
Thread OP
Happy flying guys and keep it safe !!!7


Quick Reply
Message:
Thread Tools