H-King Color 250 FPV Mini Quad Frame - Page 6 - RC Groups
Thread Tools
Apr 25, 2016, 10:56 AM
Registered User
Crazycanuck_r's Avatar
Happened while tuning P settings, glad I bought two. I didn't like the red so much anyways. Ok black one you're up next.
Sign up now
to remove ads between posts
Mar 20, 2017, 06:19 PM
Registered User
I just got this frame (first time user), and the PDB is a fire hazard.

They put two LM7805 in parallel. This is a really bad idea.

Do yourself a favor and remove one of those two regulators (one is plenty enough to provide 0.5 A to your controller).

This will allow the PDB to draw less current, and run cooler.
Oct 13, 2017, 12:40 PM
Registered User
Originally Posted by tbraber
Here is my Customized version, made it a bit lower (22mm) and added motor protection with WS2812 Leds.

These are the component I used:

Motors: Tarot 2204 1550KV
Props: 6" KingKong 6040 Bull nose
Frame: Diatone 250 Nylon
Flight controller: CC3D with Betaflight
ESC: ZTW Spider 12A flashed with BLheli 14.302
Receiver: FrSky FrSky-X4RSB Connected via SBUS with telemetry
Bleutooth: HC-06

WS2812 Leds: CJMCU WS2812 LED board
XT60 adapter: Blue sky XT60 PCB connector
Spacers Nylon: M3x22mm Nylon Hex Standoff Female/Femal

FPV gear:

Camera: Eachine-700TVL 2.6mm-Lens 1/3-CMOS 110-Degree
Transmitter: Boscam FT958 40CH 5.8G 600MW


Transmitter: Eachine Racer 250 Spare Part 5.8Ghz 600mw with OSD

I have used low KV (1550kv) motors for this build. In combination with the 6040 Bull Nose props it flies and sounds fantastic.

did the yellow "walls" between the top and bottom frame sections come with this frame or did you source them from somewhere else? Also where did you get the motor protectors/led mounts from?

Thread Tools