My Logo 10 is in the air! - RC Groups
Thread Tools
Jan 16, 2002, 05:07 PM
Suspended Account

My Logo 10 is in the air!

Well I got in about 6 flights this afternoon. (sunny 73 deg F or 23 deg C, ain't working from home in Florida great!) The Logo 10 flies swell and just needed some minor trim adjustments. I was getting about 8 min 30 sec on a 2400 mah pack and about 6 min on my 1700 mah packs. I was just hovering so the flight times should go up slightly with forward flight and as the packs get a few more cycles on them.

I need to borrow a tach to check the headspeed. Right now I have the GOV set to 60% of the full throttle range and it feels like around 1300 rpm. The Logo is hovering a little below half stick so I'll play some more with the pitch curve and the GOV.

It is wonderful to be able to just fly in the yard or the street in front of the house. Silence is golden........

Logo 10 rating:

Sign up now
to remove ads between posts
Jan 16, 2002, 06:15 PM
Registered User
JIMJAM's Avatar
That picture sums up the entire reason I got into electric helis years ago.
Jan 16, 2002, 08:41 PM
-Flight enthusiast_
gpeden's Avatar
Hey! Where's the snow?!!!!!

Congrats on your maiden flights and your choice of where to live

Jan 16, 2002, 10:49 PM
Registered User

Its Here

Well I just picked up mine from the post office tonight, looks very nice.No damage from shipping. Nice picture Brad looks warm, its snowing and blowing here. Time to build!!

Jan 16, 2002, 11:32 PM
misskimo's Avatar

hey , MAN!!!!!! I miss Mississippi weather

man you got it made in the shade, I got it cold and its getting old , I sure miss the trees too , as you can see up here in Alaska , way up in Alaska where the trees dont grow and cold , cold cold , this picture was taking last week and it was 25 below , 2 in the afternoon, the truck is a 777 , that holds 100 tons of rock, thats a D 9 , nice picture though huh? but this place during the summer is great too , by the rivers there is trees , but they are small and I just wish I could fly where you are at , Tony

Thread Tools