Dominion 2-HW ,a Self-Righting Foiling RC Keelboat/ One-off Design & Build Project - Page 42 - RC Groups
Thread Tools
Nov 30, 2017, 07:24 PM
Registered User
DLord's Avatar

Dominion 2-HW "A" Rig


Back on it today through the weekend-should be able to knock it out leaving just the module and end pieces for the Trapeze Power Ballast System. May be able to get the resin by the end of next week. THE END IS NEAR..........
Sign up now
to remove ads between posts
Dec 01, 2017, 05:21 PM
Registered User
DLord's Avatar

Dominion 2-HW "A" Rig


Finished the "A" rig main -jib tomorrow. Main appears to have a really good shape which is typical of my sailmaker. Still need insiginia. The velcro straps go around the luff wire and allow the sail to pivot to the lee side of the mast -seems to work real well. Mast does not appear like it will disrupt flow on the lee side.


Dec 02, 2017, 06:59 PM
Registered User
DLord's Avatar

Dominion 2-HW "A" Rig


Finished the rig today! Jib shape looks excellent as does the main.

Dec 03, 2017, 02:34 PM
Registered User
DLord's Avatar

D2 Trapeze Power Ballast System


Here are all the components of the System except the carbon end pieces that need to be extruded and the rack tubes . Just need to get resin.......

Dec 03, 2017, 04:22 PM
Will fly for food
davidjensen's Avatar
I ordered my resin and hardeners yesterday.
Dec 03, 2017, 06:00 PM
Registered User
DLord's Avatar

project?


What are you building?
Dec 03, 2017, 08:09 PM
Will fly for food
davidjensen's Avatar
RR III. The build starts January 1st. Iíve sorced most all the construction materials and the ribs will go to the laser cutter tomorrow. I received the balsa last week.
Dec 03, 2017, 08:47 PM
Registered User
DLord's Avatar

Iom


Thats a very good looking boat!
Dec 05, 2017, 02:09 PM
Registered User
DLord's Avatar

F3 in Model Yachting (again)


But unfortunately not flying this time. Wanting to talk with the owner-Jim Linville so I e-mailed him just now.