Thread Tools
Old May 19, 2001, 04:17 PM
mrebman is offline
Find More Posts by mrebman
Registered User

Where can I have some Battery packs made for my Teddy?


I would like to have a couple of say 1600 Mah Nimh battery packs made up for my Teddy
(6-cell Packs of AA cells). Do you know of anybody who makes up packs to order. I really don't want to try & build them myself.
Will the Teddy work OK with these?
Sign up now
to remove ads between posts
Old May 19, 2001, 05:37 PM
yb2normal is offline
Find More Posts by yb2normal
Frequent User
yb2normal's Avatar
I don't suppose my opinion counts 'cause I'm the one who suggested these batteries but they really do work well, and you can remove about 3/4 of your lead because the batteries are so much heavier than the nicads.

I'd offer to solder the pack together for you for free but the shipping costs would really eat up any savings you'd get by not buying a prebuilt pack. Take the batteries to your local hobby shop and ask one of the young kids manning the RC counter if he'd do it for you for a few bucks.

Good luck!
Old May 19, 2001, 06:38 PM
Mark Wood is offline
Find More Posts by Mark Wood
characters welcome!
Mark Wood's Avatar
We tried 6xAA Nimhs on the 7.2v Teddy and it wasn't very encouraging at all. More of a controlled glide. I would stick to either 6 Nicads (use the 1400AEs) or up the cell count to 7 AA Nimhs. Either that or replace the 7.2v motor with a 6v one if you REALLY want to use the Teddy on 6 AA Nimhs.

mw
Old May 19, 2001, 07:19 PM
yb2normal is offline
Find More Posts by yb2normal
Frequent User
yb2normal's Avatar
My Teddy came with a 6V motor, so the 6 NIMH worked fine, even in the thin air here in Colorado.

Old May 19, 2001, 07:32 PM
sf_247 is offline
Find More Posts by sf_247
Registered User
We can get you a couple of packs of 7 cell Sanyo 1600NIMH AA cells if you wish.
We have 8 cell packs on Sale for $24, but if you think 7 cells is the way to go then we could get you the 7 cell packs for $23 with quality silicone wire leads. Build time would be a few days.

Anybody else want some?

Shawn
eflightpower.com
Old May 19, 2001, 09:56 PM
yb2normal is offline
Find More Posts by yb2normal
Frequent User
yb2normal's Avatar
Note, however, that you'll have to modify the Teddy to fit 7 AA cells.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Where can I ge tan X-3d mod for my x-ufo? AustinTatious Coaxial Helicopters 3 Aug 24, 2007 09:49 PM
Discussion Where can I get a "higley hub" for my outrunner? randall1959 Electric Warbirds 0 Apr 30, 2006 03:20 PM
Where can I get cell balancing connector matching for my Thunder-power pack? chan Batteries and Chargers 3 Sep 27, 2005 12:01 AM
Where can I find GWS Battery Packs? mrebman Parkflyers 5 May 10, 2003 03:01 PM
Where Can I get some Zapped CP1700 for my Cox F18 Joe Elston Electric Ducted Fan Jet Talk 6 Jul 12, 2001 08:39 AM