Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jun 18, 2004, 09:42 AM
Lv2Fly is offline
Find More Posts by Lv2Fly
RC-Nut-Job!
Lv2Fly's Avatar
Question

Covering the T-33 Shooting Star (Kyosho)?


Hello one and all:

I would like to cover my T-33, its about 4 years old now and I would like to upgrade it (motorsystem and fan already upgraded 16/15/2, woooo she flys really nice)

So I would like to give a freash look, I'm not looking to glass it or silk it and dope it....Just a simple covering....

The fuse is not a problem ...my question what would be the best way to cover the wings........They worrie me as the foam is VERY thin and I'm afraid even the lowest heat will cause warping......

Can anyone one who has any input or maybe has done this particular job them selves shed some info as to how I can do it.

Please give the name of covering, the heat you used and also if you sprayed on any type of adhesive first to help make covering stick better.

I would greatly appreciate it.

Best flying to all...Clear sky's.....

James
Sign up now
to remove ads between posts
Old Jun 18, 2004, 10:41 AM
kevin is offline
Find More Posts by kevin
Registered User
kevin's Avatar

t-33


i used chrome ultracoat plus, red ultracoat plus, and auto pint stripe to cover my t-33.

the ultracoat plus has a sticky back. you can apply it and then add low heat to shrink it on.

my t-33 flies with the tip tanks (not shown). aveox 1114/4y , stock fan with aluminum spinner and collet, 12 cells (4s3p lithium soon). i would imagine that i have close to 70 flights on this airframe.
RCG Plus Member
Old Jun 18, 2004, 12:24 PM
Lv2Fly is offline
Find More Posts by Lv2Fly
RC-Nut-Job!
Lv2Fly's Avatar
Hi Kevin....

All I can say is that your T-33 is a work of art!

Can you please post the site I can order the alum spinner and collet or give part numbers to these items.

I also understand that Wemotec makes a fan ...what is the part number (anybody?) Please....

Also I just ordered the ultra coat plus. Thanks....
Old Jun 18, 2004, 01:17 PM
Ed Waldrep is offline
Find More Posts by Ed Waldrep
Registered User
Ed Waldrep's Avatar
I tried using chrome monokote on one of mine...when I applied heat, it made the foam beads show through. This happens with just about any heat shrink covering I've tried over beaded foam. Glassing the fuse would probably be the best bet if you are concerned about surface finish. Chrome monokote might look good from 10 feet but get up close and yuck (if you're picky like me). I've used Ultracoat Plus on my Zagis and since it has the adhesive on it you don't need a whole lot of heat, but when you come to a compound curve you'll need to use heat to shrink the covering, so you're again faced with the beads showing through.

As for the wing, it's got a thin plastic layer for an outside skin. I suppose you could use Ultracoat Plus on it as once again it has sticky adhesive on it to begin with and you use the heat to make it stick even better. Ultracoat goes on at a lower temperature than Monokote so it should work fine, just don't apply too much heat. Glassing the wing would be a lot of work and the wing already has a fairly nice finish on it, it'd just be dead weight to add glass to it.
Old Jun 18, 2004, 01:33 PM
demetrius is offline
Find More Posts by demetrius
Registered User
demetrius's Avatar
nice job but that thing must fly like a brick!
Quote:
Originally Posted by kevin
i used chrome ultracoat plus, red ultracoat plus, and auto pint stripe to cover my t-33.

the ultracoat plus has a sticky back. you can apply it and then add low heat to shrink it on.

my t-33 flies with the tip tanks (not shown). aveox 1114/4y , stock fan with aluminum spinner and collet, 12 cells (4s3p lithium soon). i would imagine that i have close to 70 flights on this airframe.
Old Jun 18, 2004, 01:38 PM
Lv2Fly is offline
Find More Posts by Lv2Fly
RC-Nut-Job!
Lv2Fly's Avatar
what about using 3M-77 to get the monocoat to stick and apply heat only around edges to seal?

Anyone ever try this?
Old Jun 18, 2004, 01:43 PM
Ed Waldrep is offline
Find More Posts by Ed Waldrep
Registered User
Ed Waldrep's Avatar
I don't think 3M 77 would go on thin enough and the texture would show through the film. Try Ultracoat plus, like I said it has a sticky back adhesive in it that's can also be heat activated to seal it down. The problem with the fuse is the compound curves, you have to use heat to get the covering to shrink around the curves or you get wrinkles.

The wing is the easy part, the fuse is what presents the greatest challenge. They should have used the thin plastic skin for the fuse like they did with the F-16, but hey, it's Kyosho, they could mess up an ice cream cone!
Old Jun 18, 2004, 01:51 PM
Lv2Fly is offline
Find More Posts by Lv2Fly
RC-Nut-Job!
Lv2Fly's Avatar
Hi Ed...

In one of my post I state I ordered the ultracoat plus....But I worded it wrong.....I should have stated I need to order the utracoat plus.... I'm having a hard time finding it....
Any links you might post or PM me. Anyone have a few rolls to sell?
Old Jun 18, 2004, 02:05 PM
Ed Waldrep is offline
Find More Posts by Ed Waldrep
Registered User
Ed Waldrep's Avatar
There's another brand it's sold under that is the same thing...Oracover Plus I think, look for that. I think my last roll of Ultracoat Plus had Oracover printed on the roll. It's also called Orastick, I just searched on the net and that seems to be the proper name and is supposedly the same stuff as Ultracoat Plus. I don't think it's available in the states anymore though, almost every reference I found to it with yahoo was in German, so getting some might be tough. I'd be interested to know if anyone has found a US source for the stuff, I don know that Hangar 9 now imports Ultracoat (used to be brought in by Goldberg).

If you really want a chrome finish then you might try Testors Aluminum Plate buffing metalizer spray paint, at least on the wing. Don't try it on the foam, it well eat the foam. You just spray it on and rub with a cloth when dry and it looks almost like bare aluminum. You could glass the fuselage and then use it but it's tough to get a smooth finish and still be light.

If your wing isn't too beat up you could just paint it after filing in any surface imperfections. You could always do a camo job, there's lots of color schemes for the T-33 out there.
Old Jun 18, 2004, 02:31 PM
kevin is offline
Find More Posts by kevin
Registered User
kevin's Avatar
" nice job but that thing must fly like a brick! "

if bricks fly about 80 mph and are easily handlaunched , then yes it flies like a brick.
RCG Plus Member
Old Jun 19, 2004, 03:05 AM
demetrius is offline
Find More Posts by demetrius
Registered User
demetrius's Avatar
i didnt mean to offend you in anyway but theres no way that plane will do 80mph! Maybe 70mph down wind
Old Jun 19, 2004, 04:39 AM
Kyri is offline
Find More Posts by Kyri
Registered User
Kyri's Avatar
I covered mine in a sticky backed atrists paper but I have no idea what its called (I was given some).

I think the T-33 in siver looks very good and the weight gain is not much.
Old Jun 19, 2004, 10:44 AM
Lv2Fly is offline
Find More Posts by Lv2Fly
RC-Nut-Job!
Lv2Fly's Avatar
Kyri:

Thanks for that tip....on the artist foil paper...
I'll check it out if my search for Ultracote + fails...

I have located a few web sites that list they have ultracote +
Looks like I will have to wait for monday to see if I can reach them buy phone or they return my emails.

I will post the sites that I find "IF" they have it for anyone else looking for this product.

According to my search and info, Ultracote and Ultracote + is now sold under HANGER9 name.

I will post back.
Old Jun 21, 2004, 06:28 AM
Greg D is offline
Find More Posts by Greg D
Aircraft Part Separator
Greg D's Avatar

A Good Place To Start?


I can't seem to locate any of the the kyosho T33 are any still available?
Old Jun 21, 2004, 05:10 PM
Lv2Fly is offline
Find More Posts by Lv2Fly
RC-Nut-Job!
Lv2Fly's Avatar
No longer in production.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale NIB Kyosho T-33 Shooting Star dt8666 Aircraft - Electric - Jets (FS/W) 7 Feb 15, 2007 03:10 PM
Kyosho T-33 Shooting Star - Balance Point KevWal Foamies (Kits) 6 Apr 17, 2004 06:10 AM
Value of kyosho t-33 shooting star Adee Electric Ducted Fan Jet Talk 20 Mar 24, 2004 04:31 AM
FS: Kyosho T-33 Shooting Star D/F nbj6879 Aircraft - Electric - Airplanes (FS/W) 16 Mar 02, 2003 12:55 PM
WTB: Kyosho T-33 Shooting star Flyingfool Aircraft - Electric - Airplanes (FS/W) 5 Apr 12, 2002 12:45 AM