Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Jun 16, 2004, 11:59 AM
munter is offline
Find More Posts by munter
Registered User

Anyone want my 3 in 1?


Hey,

I know there are a couple of guys here who have been fixing those pesky 3 in 1 boards and after a bit of reading I've decided I just don't have the skills to attempt a repair on my fried Aerohawk board myself.

So...

Anyone here want to buy my slightly cooked 3 in 1? Throttle ok but tail broken. I'm assumping its a dead FET so could be a cheap repair if you know your stuff. $10 plus postage. Alternatively if you can fix it I'll pay $10 and I'll cover postage .
I've ordered a PG03 gyro and a hummingboard for mixing but it would be good to have a spare if it all goes pear shaped again.

I'm also no closer to finding out why my Azaar antenna hates my GWS 6ch Rx, gone back to stock for the moment but am hoping its a faulty antenna and not a case of having to change the Rx to be able to use the Azaar...


Cheers

M
Sign up now
to remove ads between posts
Old Jun 16, 2004, 12:10 PM
OmegaDot is offline
Find More Posts by OmegaDot
Registered User
IIRC, you indicated that the red LED did not come on after power up. That suggests a problem with the yaw rate sensor or one of the microcontrollers.
Old Jun 16, 2004, 12:15 PM
aerohawk1 is offline
Find More Posts by aerohawk1
micro mechanic
aerohawk1's Avatar
I've PMed you...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! A problem with my 3-in-1/Receiver and Optic 6 avt Micro Helis 0 Jun 08, 2007 04:20 PM
Help! Looking for 3 in 1 repair service or trade of my burnt fet eflite unit. jettvolks Micro Helis 5 Feb 06, 2007 12:30 PM
looking for a 3-in-1 for my heli need it quick littlepiston Aircraft - Electric - Helis (FS/W) 2 Apr 02, 2005 09:36 PM
How do I hook a BL controller up to my Aerohawk 3 in 1 board? Silverstreak328 Micro Helis 6 Aug 02, 2004 12:43 PM
Anyone heard of the BenQ DC1300 - 3 in 1 1.3 Megapixel? Peter Young Aerial Photography 2 Mar 31, 2003 02:35 PM