Full house electric sailplane with the JR-8103? - RC Groups
Thread Tools
Jun 10, 2004, 12:44 PM
Registered User

Full house electric sailplane with the JR-8103?


Hi,
Has anyone out there managed a full house (6servo electric sailplane)?

I'd like to get just crow for landing mode and motor (on/off)or(proportional)
on either a switch or the throttle stick.

Thanks...
Sign up now
to remove ads between posts
Jun 10, 2004, 03:31 PM
Registered User
jofo1's Avatar
I've done it. Do you have the owners manual for the 8103? If you do, skip to the back few pages of the Glider setup section. Its all there, very simply spelled out there. If you don't have it, I can probably fax a copy to you or you can purchase one from JR.

jofo
Jun 10, 2004, 04:18 PM
MDM
MDM
Registered User
MDM's Avatar
http://www.rcuniverse.com/forum/m_12...tm.htm#1352422
Jun 10, 2004, 05:37 PM
I like cheese...
Whizwaz's Avatar
I posted at the link as well. If you want, I can write down what I did. I use the standard glider settings as described in the manual for the controls. The motor operates from the prog mix switch, and took two mixes to allow the ESC to plug into the original throttle channel. (One to disable the stick to throttle, one to enable the switch to throttle.) -- John P
Jun 10, 2004, 05:54 PM
Registered Taranis User
Miami Mike's Avatar
My method will give you both variable throttle control and variable crow from the left stick. I've been using this setup for a couple of years now and believe me, once you try it you'll never look back.

http://www.vvsss.com/xp8103/

Latest blog entry: Taranis: Aileron-To-Rudder Mix.
Jun 10, 2004, 06:55 PM
Registered User
thanks all..!

Looks like it is possible after all. Sure hated to have to buy a new radio
to "simplify" this new model construction!