Shop our Airplanes Products Drone Products Sales
Thread Tools
Jan 13, 2002, 11:55 AM
Registered User

quick servo question?


the 3 wire pigtail on my gws pico servo are red in the center and white and black on the outsides. i know red is pos.,but can i assume black is neg. and white is signal? also what would happen if the black and white wires were reversed going into the r4p receiver? can anybody help before i plug in? thanks mucho.
Sign up now
to remove ads between posts
Jan 14, 2002, 09:25 AM
Registered User
It is pretty standard that white is signal and black is negative on all rc gear. With the gws recievers, +ve is always in the centre and white is next to the little tag on the plug.
As far as plugging the signal and -ve in around the wrong way is concerned they don't seem to mind, ive got away with it a couple of times, but don't blame me for any smoke!!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion quick servo question for yak 54 heligrom Foamies (Kits) 2 May 31, 2006 06:12 PM
Discussion Quick Servo Question laanguy Slope 3 Mar 02, 2006 07:12 PM
Discussion Quick Servo question Imdbombboarder Electric Plane Talk 7 Jan 09, 2006 07:14 PM
Quick servo question balsa splinters Beginner Training Area (Aircraft-Electric) 8 Mar 20, 2005 08:07 PM
Quick servo question? Steve KO Electric Heli Talk 3 Jan 30, 2002 11:14 AM