Thread Tools
May 30, 2004, 05:20 PM
small electrics r BIG FUN

Can I slow-charge 16.8v pack with a 330d or Infinity ll ?

I'd like to balance the two NiCd packs for my cordless drill. It's 16.8 volts. Is there a program on the Schulze or Infinity that will let me charge these packs for 12-16 hours at 200ma and not harm the pack or the charger ?
Last edited by Al P; May 30, 2004 at 05:22 PM.
Sign up now
to remove ads between posts
May 30, 2004, 08:17 PM
Registered User
Andy W's Avatar
With the I2, you can select a charge rate of 200mA, and then a slow charge of 200mA (the max). If it peaks, it will simply switch to fixed rate slow charge.
May 31, 2004, 08:44 AM
small electrics r BIG FUN
Thanks, Andy. Another of the many features of the I-2.
May 31, 2004, 10:18 AM
Registered User
Hi Alan, I think you can do the same on the 330-d. Hook up the battery on port #1 , you can change the auto 'C' to a fixed rate of charge with the + button I think. I think the 330-d will also charge a max of 14 hr. or something like that, and go to trickle. It has this info somewhere in the manual. (The manual could have been written a little better)

May 31, 2004, 05:52 PM
small electrics r BIG FUN
Thanks Kent. I'll give another look in the Schulze manual. I've got more than one pack to slow-charge.
May 31, 2004, 09:28 PM
Registered User
Alan, You might also look at the flow chart I printed from Schulzes website. I folded it and put it in the manual. It walks thru the 2nd output stuff too. Good luck and have a nice week.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Slow-charge saves another pack Al P Batteries and Chargers 3 Nov 28, 2003 10:49 AM
How do you form (slow charge) a 9-cell pack Parkflyer Batteries and Chargers 7 Jan 09, 2003 05:42 PM
Can I charge a 4.8v pack with a 7.2v charger? webnetxpress Batteries and Chargers 5 Jan 07, 2003 05:40 PM
Can I slow charge NiMH with this? D W Batteries and Chargers 1 Oct 21, 2002 04:34 PM
Can I slow charge my 8.4v pack with 9.6v wall charger ? Al P Power Systems 1 Jan 18, 2002 09:45 AM