Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor

First Look! ReadyMadeRC's Mako FPV Flying Wing

Built for FPV and small in size. An FPV wing that's big enough to haul some weight and small enough to fit in the back seat!

Splash

An FPV wing that can go to the field in one piece!

The Mako is built and ready to roll! It took longer to build this review than it did to build the plane!
The Mako is built and ready to roll! It took longer to build this review than it did to build the plane!
Wingspan: 47.75 inches
Length: 21.1 inches
Weight: 1.54 pounds
Wing Loading: 30g/dm2
Servos: 9g (3 included)
Battery: Suggested 3 cell 2,220 Lipo
Motor: 2212 KV2200
Prop: 6x4 (included)
ESC: Hobbywing 30A (included)
Manufacturer: ReadyMadeRC
Available From: RMRC
Price: $ PNP: 129.99 - KIT: 84.99

I love my big FPV planes. They can haul a lot of weight, cameras and batteries but when I'm packing them to put in the car or putting them back together on my knees at the field I always think the same thing - I have to get a wing! When the guys at ReadyMadeRC said they had a mid-sized wing that was made for FPV I got pretty excited. The Mako is a perfect back seat flyer. You can utilize it as a wing or you can totally outfit it for FPV. The fuse has a huge opening. That means easy access for batteries, flight boards and more.

The Mako comes with all the servos pre-installed, motor pre-installed and most of the parts you will need to get in the air. Just add your 2200 3 cell lipo and RX and fly! The CG on the Mako is actually marked from the factory under the wings.

Since there is still ice on the ground my goal was to unbox the bird, build it and let everyone check it out. Next I will put some FPV gear on it and hope for some nice weather.

Unboxing and Build Video:

ReadyMadeRC Mako FPV Wing - RCGroups (9 min 12 sec)

Flight Video:

ReadyMadeRC Mako Wing - RCGroups (7 min 39 sec)

FPV Video:

RMRC Mako FPV Video - RCGroups (3 min 13 sec)

Features:

  • An EPO FPV based wing
  • 1213mm wing span
  • Great weight capacity - up to 1.5kg
  • Low power cruise speeds
  • Locations for a gimbal, camera, TX, GPS, etc.
  • Servos can be added to the rudders
  • Indentations for throwing
  • Foam protrusions for landing
  • One foam nose for normal flying (held on with magnets)
  • Dome nose (one clear and one smoked) for FPV (held on with magnets)
  • Easy and fast build

Unboxing Photos

Build Photos:

Finished Photos:

Conclusion

I really like the looks of he RMRC Mako! The build was amazingly fast and simple. Since this was one of the first Makos in the US it had no instructions but it was so straightforward I didn't have any questions about the build. It looks great white or with stickers. I'm getting my flying setup finished today in hopes of some good weather to take it out to the field. I'm a big fan already!

Thread Tools
Old Feb 28, 2015, 10:49 AM
Pkitup is offline
Find More Posts by Pkitup
Registered User
looks good I just wonder IF it can fly like a stryker .Can you put it in a stall without having a death spiral like the tbs caipirinha?
Old Feb 28, 2015, 09:01 PM
maclover1234 is offline
Find More Posts by maclover1234
Is it summer yet?
what is the price?
Old Mar 01, 2015, 12:37 AM
Toysrme is offline
Find More Posts by Toysrme
Registered User
Toysrme's Avatar
plastic canopies are still complete fails for FPV / AP. designing a plane around one by this much. terrible. (you'd think this lesson would have been learned by the big names in FPV at this point. especially RMRC after almost everyone threw their penguin canopies away)
Old Mar 01, 2015, 02:51 AM
onefastxp is offline
Find More Posts by onefastxp
crashing build's character.
when will it be available?
Old Mar 01, 2015, 09:11 AM
boopidoo is offline
Find More Posts by boopidoo
On a holiday?
boopidoo's Avatar
Quote:
Originally Posted by Toysrme View Post
plastic canopies are still complete fails for FPV / AP. designing a plane around one by this much. terrible. (you'd think this lesson would have been learned by the big names in FPV at this point. especially RMRC after almost everyone threw their penguin canopies away)
Doesn't have to be a failure but it's difficult to get right.
Old Mar 01, 2015, 10:30 AM
Jim T. Graham is offline
Find More Posts by Jim T. Graham
Administrator
Jim T. Graham's Avatar
The prices are listed in the spec box:
Price: $ PNP: 129.99 - KIT: 84.99
Administrator
Old Mar 01, 2015, 10:35 AM
ouraydog is offline
Find More Posts by ouraydog
Registered User
The camera lens should be placed as close to the bubble as possible (to minimize reflections) and the axis of the camera should line up with the radius of the bubble (to minimize distortion)

If you do this you will get a good result, any variation from the above will result in poorer quality images. The goal is to get a central ray of light to pass straight through the bubble and hit the camera imager at a 90 degree angle.
Old Mar 01, 2015, 11:12 AM
joelwhite is offline
Find More Posts by joelwhite
Registered User
Could also leave the foam nose on and put your cam on top. There is a removable panel between the nose and black cockpit that is nice and flat. Looks like plenty of room inside too
Old Mar 01, 2015, 03:14 PM
amba is offline
Find More Posts by amba
Registered User
amba's Avatar
Really looks promising.
I'm flying a skywalker X5 for over a year now, Love the dimensions as well as the performance envelope. The battery / electronics bay which was considered huge at the time it came out now seem kind of cramped. The Mako could be worthy upgrade.

Like others, me to am not a huge fan of plastic domes, even for FPV I think I'd put the foam nose and a pan or pan/tilt camera on top.
Old Mar 02, 2015, 01:57 PM
Breezer1 is offline
Find More Posts by Breezer1
Quis custodiet ipsos custodes?
Breezer1's Avatar
Quote:
Originally Posted by onefastxp View Post
when will it be available?
You could get on a, "Pre Order" list, and when there are enough pre orders to warrant a commitment to the factory in China they will place the order and then the wait begins.
Or, 1,697 posts on this RCG thread, with all of the speculation, innuendo, subterfuge, and drooling.
Whichever comes first.

Here we go again!

Breezer1
Old Mar 02, 2015, 03:54 PM
McSkies is online now
Find More Posts by McSkies
McSkies's Avatar
Quote:
Originally Posted by Breezer1 View Post
You could get on a, "Pre Order" list, and when there are enough pre orders to warrant a commitment to the factory in China they will place the order and then the wait begins.
Or, 1,697 posts on this RCG thread, with all of the speculation, innuendo, subterfuge, and drooling.
Whichever comes first.

Here we go again!

Breezer1
Haha, that will NOT be happening... The latest info from the shipping company is an estimated port arrival of 3/10. Of course this is subject to change, but they are definitely on the way to us.
Site Sponsor
Old Mar 02, 2015, 04:12 PM
shelbonic is offline
Find More Posts by shelbonic
Registered User
When has readymade ever not dropped an
Item lol. They take bad products down so I will review when I get mine in a week or 2 LMAO
Old Mar 03, 2015, 12:44 AM
voxel is offline
Find More Posts by voxel
Registered User
Flew this at the CFL FPV meet - it's really nimble and light! And it has tons of interior space (more than the RVJet). I flew it inverted and tried a reverse cuban eight with it. Could be a dual-purpose plane (aerobatic and FPV) whereas the mini skyhunter is just a "fly-straight" plane.

I own various wings RVjets (2), FX-61, FX-84, Strykers (full and baby). It's closer to a light short-wing RVJet or Stryker.
Old Mar 03, 2015, 02:19 AM
Tommygunn is offline
Find More Posts by Tommygunn
My name is Tom
Tommygunn's Avatar
Voxel,
How does it compare to the FX-61?

Tom.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Sonicmodell Mini Skyhunter 1238mm Wingspan FPV RC Airplane PNP Whitehouse FPV Aircraft 2 Feb 17, 2015 08:19 PM
New Product Sonicmodell Mako Flying Wing 1213mm Wingspan FPV RC Airplane PNP Whitehouse FPV Talk 0 Feb 10, 2015 08:01 PM
Discussion Hobbyking Phantom FPV Flying Wing EPO Airplane 1550mm / 61 inch - closed? PeterVRC FPV Aircraft 8 Oct 10, 2014 03:38 AM
For Sale JCX-M6 Flight Controller for RC Airplane RC Model Plane FPV Fixed-wing Airplane Go4it Aircraft - General - Radio Equipment (FS/W) 1 Oct 14, 2012 12:14 AM
New Product JCX-M6 Flight Controller for RC Airplane RC Model Plane FPV Fixed-wing Airplane wenney2009 FPV Talk 3 Jun 19, 2012 06:10 AM