Thread Tools
This thread is privately moderated by Jim.Thompson, who may elect to delete unwanted replies.
Feb 15, 2015, 05:25 PM
Entropy is happening!
Jim.Thompson's Avatar
Thread OP
Discussion

Link to the Raketenwurm video - Vimeo


(24 min 8 sec)
Sign up now
to remove ads between posts
Mar 17, 2015, 04:35 AM
Everything's A Compromise
Larrikin's Avatar
Interesting that they don't do any leading edge trimming ... or any edge trimming for that matter.
The excess veil cloth from both halves just gets clamped in the mould flanges.
Mar 17, 2015, 12:21 PM
Entropy is happening!
Jim.Thompson's Avatar
Thread OP
Yes, I thought so too. The veil is so thin as to not be much of a concern. However, the main fabric at the trailing edge is.
I try at least to cut my main skin fabric 2 mm short of the trailing edge. That then provides the taper off required to finish with it reasonably thin.


Quick Reply
Message:
Thread Tools