Thread Tools
Mar 11, 2019, 09:26 AM
Registered User
So disappointed that i "modded" the single skull i had. Wish i left it intact.
Weather is too crap to fly. Working on the house. Bathroom was already done. New floors, painted walls on second floor. Ordered new beds and closets for the kids. Almost done.
Sign up now
to remove ads between posts
Mar 11, 2019, 10:17 AM
Flight for life
geotric's Avatar
For the 3 inch ones I really like the Dalprop Cyclone T 3056 C
The HQ 3 inch ones are also good . They are the Stock props for the Vortex 150.
Last edited by geotric; Mar 11, 2019 at 10:26 AM.
Mar 11, 2019, 10:25 AM
Fan of just about anything RC
SoloProFan's Avatar
Quote:
Originally Posted by geotric
For the 3 inch ones I like the Dalprop Cyclone T 3056 C

These are ok, though on some quads handling and noise are better with KingKong 3050/GemFan 3052, at least for acro stunts, for me. But the Dal do draw a little less power on full throttle and are well balanced usually.

I'm going to test HQ 3x4x3, which some claim to have the handling of the GemFan 3052, but with less current draw.
Last edited by SoloProFan; Mar 11, 2019 at 10:48 AM.
Mar 11, 2019, 10:44 AM
Flight for life
geotric's Avatar
Another good 3 inch prop. comes from Racekraft .
HQ has also a 3 inch Bull nose prop.
Lots of grip but power hungry.
Mar 11, 2019, 11:43 AM
Fan of just about anything RC
SoloProFan's Avatar
I think I'm done with bullnose props, too much noise and inefficiency. There are props that give very tight grip, without these drawbacks. But thanks for mentioning these.
Latest blog entry: For the love of the hobby!
Mar 11, 2019, 12:04 PM
Flight for life
geotric's Avatar
Quote:
Originally Posted by SoloProFan
I think I'm done with bullnose props, too much noise and inefficiency. There are props that give very tight grip, without these drawbacks. But thanks for mentioning these.
Yes I agree with Bull nose props. Not my favorite .
Have you tried the HQ 3x3x4 ?
I havent and I just found some in my hangar . I might try them this Summer..
Last edited by geotric; Mar 11, 2019 at 01:13 PM.
Mar 11, 2019, 02:24 PM
Fan of just about anything RC
SoloProFan's Avatar
I prefer 3 blade props, usually more efficient and more quiet than 4 blade, and the quad takes up a little less room than with 4-blade, so easier to fit inside a box and bring along on the road. Only on small quads, like 2 inch, or Mobula 7, where the extra blade is needed to provide more thrust, I still use 4 blade, everything else is 3-blade, I think.
Last edited by SoloProFan; Mar 11, 2019 at 02:59 PM.
Mar 11, 2019, 03:42 PM
Flight for life
geotric's Avatar
Quote:
Originally Posted by SoloProFan
I prefer 3 blade props, usually more efficient and more quiet than 4 blade, and the quad takes up a little less room than with 4-blade, so easier to fit inside a box and bring along on the road. Only on small quads, like 2 inch, or Mobula 7, where the extra blade is needed to provide more thrust, I still use 4 blade, everything else is 3-blade, I think.
Ok .
I know 4 blade props are a power killer.
I also fly with 3 blade the 110 and the 150.
Mar 11, 2019, 07:18 PM
Flight for life
geotric's Avatar
Life is like a Mountain Railway.

Extreme Railbiking Part 1, Life is Like a Mountain Railway, Rail Bikes on Abandoned Railroads. (3 min 45 sec)
Mar 11, 2019, 07:20 PM
Flight for life
geotric's Avatar
Oh well snow, rain and what else we will get tonight. ???.
I flew the Nano CPS helicopter and a few FPV flights with the Inductrix Pro.
Wow what a fast Whoop. Flying in Acro is fantastic with that small thing.
Last edited by geotric; Mar 12, 2019 at 05:42 AM.
Mar 11, 2019, 07:23 PM
Registered User
John Luciano's Avatar
Wow is that all abandon rails
Mar 12, 2019, 05:40 AM
Flight for life
geotric's Avatar
Quote:
Originally Posted by John Luciano
Wow is that all abandon rails
Yes and no.
They do get autorisation before going .
But some guys still take crazy chances.
Last edited by geotric; Mar 12, 2019 at 05:54 AM.
Mar 12, 2019, 06:03 AM
Flight for life
geotric's Avatar
Oh the Blade Nano CPS helicopter, the BetaFPV Beta 75 X and the Blade Inductrix Pro.
For size comparaison .
Last edited by geotric; Mar 12, 2019 at 06:32 AM.
Mar 12, 2019, 10:15 AM
Embargo lifted.
kenstogie's Avatar
Well I've been practicing LOS (with the Bugs3 and XK100) and FPV freerider (in FPV mode) and it's time to go Acro FPV.... weather/wind permitting I am taking the Q90C (froggie) out after work.....my hope is that the small/lighter weight will help prevent any damage when or even if I crash... which I probably will but that's ok everyone does...... I am going to fly over grass to help too. Fingers crossed
Mar 12, 2019, 10:42 AM
Registered User
Quote:
Originally Posted by John Luciano
Wow is that all abandon rails
Wow, I need to build a new set of cattle yards. Trouble is the postage on all that iron would kill me!


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-Review BOJIANG S1 Review (Nihui U807 Killer?) - [Setup, Flight Test, Pros & Cons] rc808hawaii Mini Multirotor Drones 20 Aug 07, 2018 04:32 PM
For Sale BRAND NEW Nihui U807 aggillator Aircraft - Electric - Multirotor (FS/W) 4 Nov 11, 2017 04:05 AM
Help! Taranis/4in1/Nihui U807/Flysky question landshark31 Beginner Multirotor Drones 0 Feb 02, 2017 12:29 AM
Help! Nihui U807 Quadcopter Not Pairing LuckyEarthling Beginner Multirotor Drones 3 Sep 22, 2015 06:52 PM