|
|
|
|
|
Anybody got hex frame plates top/bottom they don't need or would sell?
|
|
|
|
|
|
|
|
|
|
----
|
|
|
Last edited by justplainold; Nov 07, 2017 at 11:11 AM.
|
|
|
|
|
|
Just need the hex frame plates, thanks...
Must say though, I took my S250 and hex out for a brief flight yesterday. They do fly nicely(hadn't flown them in a while..). Too bad they're so brittle. I really like the hex in particular. It's still a keeper for my hangar. (Thus the search for plates..) |
|
|
|
|
|
|
|
Still flying my s250aq every day. I upgraded to 20 amp Littlebee esc's and dal three bladed cyclones. She's got some punch now! Plus I added a micro swift 2 and a 200mw vtx. Its my go to rig for fpv!
But you are correct it is brittle. I'm lucky I had a spare frame because I bounced her off the runway and completely destroyed the bottom plate about a week ago. |
|
|
|
|
|
|
|
|
I have two quads and a hex, and have flown them all a lot. I mostly fly LOS, but was learning FPV. Which led to more crashing, in softish grass mostly. Still, legs and arms break often, and then I noticed tears in my frames.
I will still fly my quads til they die. I have a lot of learning to do yet for FPV. I have a spare frame and lots of feet and arms. (And a whole hex PNP minus one motor* and frame plate..) But really it's the hex I like most. I like it for LOS when the ground is too wet or muddy, or it's too windy, for my planes.... Crazy how they were on sale for like €90 at one point. Long time ago.. I still like the concept too - interchangeable arms for various frame styles, no soldering required, etc. Just needs thicker frames and sturdier arms... *. So in addition to a frame I guess I also need a motor to complete a new hex. I might even try to double up the frame.. |
|
|
|
|
|
|
|
|
This frame looks cool....
https://hobbyking.com/en_us/hobbykin...frame-kit.html Especially for that price. I wish I had the wherewithal to swap over all of the components from the Spedix hex to it… I wonder if it would be possible to use the Spedix PCB even…, and thus avoid soldering. I love my Spedix hex, but really want and need something more durable.. And 4s capable... I guess with these that would be no problem?.. https://hobbyking.com/en_us/afro-20a...-firmware.html |
|
|
|
|
|
|
|
|
Would there be an improvement in performance on 3s, using 2205 2300kv motors?
Talking about the hex here... Really still want a LOS hex, but looking for more oomph... Still kind of keen on trying the Thorax frame with 20a m8ni Afro ESC’s, but not sure what I’d be getting myself into... |
|
|
|
|
|
|
|
|
Well I bought three Thorax frames (€5 apiece..), plus six Afro 20A ESC’s. We’ll see how it goes?
Anybody have two SS new motors from a Spedix kit to sell? |
|
|
|
|
|
|||
|
|
Need Advice
Hi, I just assembled my S250Q which I bought about a year ago..
I got problem where the quad is constantly shaking/ rocking either in pitch axis or in roll axis, both in attitude and rate mode. Other thing that got me confused is, the quad will first rise quickly on around 50% throttle. then it will hover at around 5 metre above ground. Once I apply subtle pitch or roll input, it will start rapidly losing height even though I didn't decrease the throttle at all. If I slowly put more throttle it will start accelerating upwards fast. So basically it's very difficult to control. Could this be due to the shaking which cause inefficient thrust/ power application? I'm newbie to multirotors (this is the 2nd attempt). Previously I only fly fixed wings. My FC is CC3D. Prop is 5x4.5 (not bull nose) Atttached is my setup in LibrePilot Below is the link to the video. From the sound, we can hear the effect of the shaking, the sound is not linear nor smooth.
Please kindly advise on what might be the problem. Thanks |
||
|
|
Last edited by Klinci; Nov 11, 2017 at 12:14 PM.
Reason: Add link to the video
|
||
|
|
|
|
|
Anybody got a new stock motor for sale? I need a new one with bullets… Will pay shipping.
|
|
|
|
|
|
||
|
Quote:
I'm in suburbs of Chicago Il USofA Brand New! original Sunny Sky's! maybe 2 of em? leftover from one of those Bangood $120 sales over year ago,- CC3D fc - in unopened bag few 12a stock round ESC's red ? green? Not sure if its right or left threads.... I just repacked ALL that old stuff away last night!for a long winters nap... complete Eachine 250 racer, in parts - needs arms, camera & VTX no sat receivers or PDB boards PM & we'll work a deal I put a Naze flip32 full! on my Spedix (round) HEX- Altitude hold -barometer, compass-= heading,for ? telemetry?, - headless mode- Runs Cleanflight - old version but works great - plug & play with header pins like CCd3 Its kind of a dog compaired to my BK 210's running 4S Oh BTW these Spedix 12A escs will handle 4s- I use my old run down ones the Black Knight. -get about 3+ min flights, comes back with ESC s& motors warm but not too hot to touch.... these DO kill old 4s's batteries. catch up later today when I get home & take inventory- pics,,,,, gotta run! |
|
|
|
||
|
|
|
|
|
Thanks, shipping in the US.
How well do the stock motors hold up to 4 S? I got my Thorax hex frames today, so busted out my old $120nsale hex ha ha... Ising 20A Afro mini slim ESC’s though. Anyway, I have everything all mounted up, and the setup Wizard was going great, til Imgot to,the Transmitter Wizard. Anybody got a tip? QX7 radio, D4R-II receiver, set to PPM o OP, etc... Been a while since I set up an MR on OP, so,not sure if I’m forgetting thing.... |
|
|
|
|
|
||
|
|
Quote:
Spektrum here. Here's what I have left for stock Spedix 4sec. 3green 1 red 2 new bullet plug Sunny Sky's motors 1 new CC3d FC Do you know how to private message? We can discuss price then. |
|
|
|
||
|
|
|
|
|
PM'ed.
As for the no stick response on the transmitter wizard, I think it must be a general set-up thing. There must be a wire not going somewhere it should be or something. My receiver is bound, but somehow the signals from the radio to the receiver are not making it to the FC I think… So I must be missing something basic here I assume. I'm pretty sure I had this back at the beginning, but I don't remember how I solved it. Been a couple years by this point… BTW, this Thorax hex frame seems pretty cool. Very solid beefy arms. The LED situation isn't quite as good, and I don't know what to do about feet, for example if I want to mount the battery on the bottom. Otherwise it seems like a pretty cool frame. On sale for under €5 too… I bought three of them. If it doesn't work out I also bought two Trifecta tricopter frames, also on sale for under €5 apiece. I got them mostly just to have something to build and fiddle with in the winter. Not expecting the most up-to-date performers or anything… |
|
|
|
|
|
||
|
|
Quote:
1 more Esc + 1 motor Hex frame plates top & bottom.(round hex) + complete Hex without sat receiver - ran 4s no problem , just take it easy. Clean flight with flip 32 vCard. KK2 fc Aq? quad with BN naze F1 fc 2 motors & ZTW 30a esc s. Ran clean flight . needed motors for another quad so I stole them.& maybe Ztw sec is flakey? |
|
|
|
||
