Thread Tools
This thread is privately moderated by dragbikebam, who may elect to delete unwanted replies.
Jan 14, 2015, 06:46 PM
Registered User
dragbikebam's Avatar
Thread OP

Matrix Mods

I modded the camera bracket by spacing and adding foam for support. Replaced the Velcro strap with a rubber band and spaced the camera so the power/video connector is not touching the gimbal bracket. Hoping this will make huge difference with video quality issues from vibrations. I also have replaced the props with the Tiger Motor brand. I have tried my best balancing the motors and even had to do some light balancing on the TM props. I will do some testing tomorrow with nice weather expected.
Last edited by dragbikebam; Jan 14, 2015 at 07:02 PM.
Sign up now
to remove ads between posts

Quick Reply
Thread Tools