Thread Tools
Apr 17, 2017, 07:00 PM
Registered User
Quote:
Originally Posted by birdofplay
For MY 200% build I will be using some 3D Printed Cyls/Exhaust stalks
I like the cooling fin detail.
Sign up now
to remove ads between posts
Apr 18, 2017, 06:30 AM
Retired CAD guy
birdofplay's Avatar
I saw another with the Rocker Covers so I may be trying that one yet today as well.

I need some Black PLA as I only have ABS currently and it's not as easy to work with.
Apr 18, 2017, 08:57 AM
Registered User
Looks great, Bob!

I like the cooling fin detail a lot. In Black PLA with some copper and silver painted highlights ... steampunk!
Apr 20, 2017, 10:34 AM
Retired CAD guy
birdofplay's Avatar
Finally getting back to reporting progress here.

The CAD design constraints for 3D printing are a bit more restrictive than some other uses.

But I think I can do it now.
I've order some Black PLA Filament for the Cyl Head Printing in Black.

This AM I went out and CNC cut all the Foam parts plus the 3mm/1/8" lite Ply parts. Please See Pix.
I see now that I didn't get pix of all the sheets as cut. Oh well ...

I know realize that all this sheeting doesn't pack up well into a single Box.
So it's now two boxes of 16"x35"x2" - 2# 6 oz plus 40"x13"x2" - 1# 14 oz.

Next I'll go make on for myself :>}

BOB
Last edited by birdofplay; Apr 20, 2017 at 10:42 AM.
Apr 20, 2017, 10:58 AM
Registered User
Looks GREAT! Can't wait to build this airplane. Really like the 3D printed cylinder heads too.
Apr 20, 2017, 11:59 AM
Retired CAD guy
birdofplay's Avatar
Well IF You want to wait till next week I will be trying out the Black or Silver/grey filament.

Bob
Apr 20, 2017, 04:44 PM
Registered User
Jürgen Be's Avatar
There`s another video of my 200% Lisa out:

have fun while watching

Jürgen

Lisa 200% , Wasserflugtreffen-Hagnau / Bodensee April 2017 (5 min 7 sec)
Apr 20, 2017, 06:02 PM
Retired CAD guy
birdofplay's Avatar
That sure is a pretty build !

Bob
Apr 21, 2017, 08:14 AM
Registered User
Jurgen ... gorgeous build and it looks like a great flyer. I hope mine turns out as nice!

Bob ... I'm fine with the white. Don't mind painting the base color black.
Apr 21, 2017, 12:05 PM
Retired CAD guy
birdofplay's Avatar
OK THEN I'M READY TO SHIP !

For anyone else interested I have this on my web page now for ordering.

Bob
Hoosier Cutout Service ( Just google it)
then goto the Jurgen link
Apr 24, 2017, 07:04 PM
Registered User
Quick shout out to Bob at Hoosier Cutout Service. I received my LISA 200 kit today. Both boxes were expertly packed and nothing was damaged or bent. The quality and finish of the CNC foam and ply parts is excellent ... a tremendous value, IMHO. The 3D printed engine parts are fantastic, especially the raised fins. I can't wait to begin building the first and only LISA 200 in the US! Now, were is that German translator app ... <grin>
Apr 24, 2017, 07:34 PM
Retired CAD guy
birdofplay's Avatar
Well ... thanx for the comps.
I just do what I can.

About the 3D raised fins parts.

I discovered a "LEAK" in my extruder today.
That explains the slight brown streaks in your parts and others that I have done.
I was really surprised when I discovered this problem.
All that was necessary was to tighten the Nozzle and Hot End Block.
If you're not going ot paint them I now have Black Filiment so I could get
a reprint for you.

I have a TXlater App that I used last Fall when I did a Med Cruise.
And thers is one that translates SIGNS via a photo/Camera pic.

Best

Bob
Hoosier Cutout Service
Yesterday, 10:16 AM
Registered User
Very generous of you to reprint the parts, but not necessary. They will get painted, so the brown streaks are not an issue.
Yesterday, 07:59 PM
Retired CAD guy
birdofplay's Avatar
Wheew !

Some modelers are so picky.

then again this IS the Scratch builder forum and mod should be somewhat expected
yet easy to deal with.

I look forward to you build.

Best

Bob


Thread Tools