Thread Tools
May 05, 2004, 05:50 PM
Our Daddy and Heli Junkie
Fred Bronk's Avatar

Protech Zoom 400/Shogun VIII


OK guys, here we go for VIII

Boyd, why don't you go first

https://www.rcgroups.com/forums/show...5&page=1&pp=15
Sign up now
to remove ads between posts
May 05, 2004, 06:48 PM
2 MANY TOYS :-)
Hoverup's Avatar
...
Last edited by Hoverup; May 27, 2004 at 11:43 AM.
May 05, 2004, 06:50 PM
MODMAXX4748's Avatar
yea TONY spin that thing around 2500 or 2600 and you will the micros are wild @ that haead speed!!! i spin my H2 and my pro piccolo around that!!! iam hopin i can get this SHOGUN 400 to out perform both of them!!!!
May 05, 2004, 06:51 PM
MODMAXX4748's Avatar
hey BOYD THEM CF BLADES ARE SWEET!!!!
May 05, 2004, 06:52 PM
Registered User
which of the hacker heatsinks on aircraft world is the right one to use on the himaxx, the s version or the l
May 05, 2004, 07:00 PM
Registered User
mdttb's Avatar
Quote:
Originally Posted by chopped_d
which of the hacker heatsinks on aircraft world is the right one to use on the himaxx, the s version or the l
I believe it's the B20 L Heatsink sure Boyd will confirm this.
May 05, 2004, 07:54 PM
2 MANY TOYS :-)
Hoverup's Avatar
http://aircraft-world.com/shopexd.asp?id=1983


Works perfectly with the HiMaxx 2025 motors and the Zoom chassis.
May 05, 2004, 07:54 PM
TeamTP,Minicopter,Spartan
misskimo's Avatar
hey , well whats all the after market parts you can get for this little dude ? If I go with that headspeed will I blow out a tail with the stock setup ? where did you get those blades Boyd? what else you have up you sleave ? Im thinking about going HV with it , 10s watch batteries lipo but I need a 200 kv motor and a 1 t pinion. he he .
Tony
May 05, 2004, 08:03 PM
2 MANY TOYS :-)
Hoverup's Avatar
Quote:
Originally Posted by misskimo
hey , well whats all the after market parts you can get for this little dude ? If I go with that headspeed will I blow out a tail with the stock setup ? where did you get those blades Boyd? what else you have up you sleave ? Im thinking about going HV with it , 10s watch batteries lipo but I need a 200 kv motor and a 1 t pinion. he he .
Tony
CF Blades came from Fung at flying-hobby.com in Hong Kong. I think there is a group buy under way with mdttb at the helm.

Cheers - Boyd
May 05, 2004, 08:09 PM
Registered User
mdttb's Avatar
pm'ed you Tony with the site url for Fungs and the thread that's going on for the group buy. Waiting on a coule of guys here on the west coast to get off work to see what they want.

Quote:
Originally Posted by Hoverup
CF Blades came from Fung at flying-hobby.com in Hong Kong. I think there is a group buy under way with mdttb at the helm.

Cheers - Boyd
May 06, 2004, 07:34 PM
MODMAXX4748's Avatar
Hey Mdttb Can I Get In On The Group Buy?
May 06, 2004, 07:34 PM
MODMAXX4748's Avatar
Hey Boyd Were Did You Get Those Tuff Skids?
May 06, 2004, 08:31 PM
2 MANY TOYS :-)
Hoverup's Avatar
Quote:
Originally Posted by MODMAXX4748
Hey Boyd Were Did You Get Those Tuff Skids?
www.micro-flight.com

Mark at MJP Carbon ( www.mjpcarbon.com )will have my design Zoom/Shogun/Dolphin/MicroStar 400 CF chassis interface pieces next week to make installation of these struts and skids a piece-o-cake.

Cheers - Boyd
Last edited by Hoverup; May 06, 2004 at 09:23 PM.
May 06, 2004, 08:49 PM
Registered User
mdttb's Avatar
What do you need MODMAXX4748 ?



Quote:
Originally Posted by MODMAXX4748
Hey Mdttb Can I Get In On The Group Buy?
May 06, 2004, 08:51 PM
MODMAXX4748's Avatar
i was looking@those cf blades


Thread Tools