Thread Tools
Aug 15, 2014, 10:04 AM
☢ ɴᴏᴏʙ ☢
trinco's Avatar
Thread OP
New Product

RD290 Mini Hex














Frame spec.
▶ Full 3k Twill Weave Carbon Fiber
▶ MTM 290mm
▶ 5" props Max
▶ Flight Controller (Recommended to use 90 angle pins)
● 30.5x30.5mm Mounting Holes (Open Pilot CC3D, Open PilotRevo, Naze32, Flip32 etc.)
● 45x45mm Mounting Holes (KK2, MultiWii etc.)
▶ Motor Mount
● M2 12x16mm
● M3 16x19mm

What's Included in the box?
● 1 x Top Plate (Clean Section / Carbon Fiber / 1.5mm Thickness)
● 1 x Bottom Plate (Clean Section / Carbon Fiber / 1.5mm Thickness)
● 1 x Top Plate (Dirty Section / Carbon Fiber / 1.5mm Thickness)
● 1 x Bottom Plate (Dirty Section / Carbon Fiber / 1.5mm Thickness)
● 1 x Battery Tray Plate (Carbon Fiber / 1.5mm Thickness)
● 1 x 40mm CCD cam Plate (Carbon Fiber / 1mm Thickness)
● 2 x Short Front Arms (Carbon Fiber / 3mm Thickness)
● 4 x Long Rear Arms (Carbon Fiber / 3mm Thickness)
● 6 x M3 Silicone Bobbins (30/40/50 Shore A Hardness - Selectable)
● 8 x 40mm Nylon Standoffs
● 2 x FPV-Reconn Multi-Purpose Silicone Band
● Gopro Mounting Plate
● FPV-Reconn Power Distribution Board
● Flight Controller Mount
● Screws, Spacers etc.

Weight : 220grams

Selling Price : $170 USD (Excluding Shipping)
http://fpv-reconn.com/store/index.ph...product_id=112
Shipping Worldwide : $13 USD (Registered Airmail)

Dealers / Retailers
Dronematters.com

RD290 Mini Hex Teaser (1 min 52 sec)














Last edited by trinco; Sep 23, 2014 at 06:51 AM.
Sign up now
to remove ads between posts
Aug 15, 2014, 10:04 AM
☢ ɴᴏᴏʙ ☢
trinco's Avatar
Thread OP
Reserved

Build Logs For RD290 Mini Hex
liftbag - Part 1 / Part 2 / Part 3
chyoung - Part 1
markws

Build Logs For RD290 UBER Hex (Upgrade)
Hadriez
Last edited by trinco; Oct 26, 2014 at 10:36 AM.
Aug 15, 2014, 10:13 AM
Also known as - FarHar72
FF72's Avatar
Something new... Looking forward to it bro... Looks stunning, sleek...
Aug 15, 2014, 10:50 AM
Registered User
ripmax's Avatar
Great video
Aug 15, 2014, 11:32 AM
Registered User
kaysee's Avatar
Wooohoooo!!! Finally!!
Aug 15, 2014, 06:42 PM
Quad On!!
nate25j's Avatar
Looking good! May have to try a hex now!
Aug 16, 2014, 03:26 AM
Registered User
2 of my recent videos from RD290hex

RD290 Funfly (3 min 58 sec)


RD290 Hex: Near Missed (6 min 51 sec)
Aug 16, 2014, 11:01 AM
Registered User
I think I'd add another configuration to the list.. but you'd need 3 nylon standoffs around 45mm. here's mine..


Aug 16, 2014, 02:23 PM
1sq
1sq
Registered User
1sq's Avatar
Thumps up to this frame. Versatile and cost less to comparable frame.
Aug 16, 2014, 02:38 PM
Registered User
This frame is dope!

Hadriez where's your fpv cam mounted?
Aug 16, 2014, 05:03 PM
Registered User
I wanna watch this also.
Aug 17, 2014, 03:41 AM
Registered User
@lumberzach, the CCD cam is mounted where it is designed to be mounted. but yeah can't see it in the photo. I'll post another photo on it later.

Here's one of my early video when I got this frame from Trinco. Checkout my youtube channel for more vids

Funfly - RD290 Hex | Blackout Hex (3 min 44 sec)
Aug 17, 2014, 03:45 AM
Registered User
Mini chaos ... RD290 Mini Hex!

Aug 18, 2014, 12:04 AM
Registered User
this is osom!!
Aug 18, 2014, 02:15 AM
Registered User
kaysee's Avatar
Into The Sun :: FPV Mini RDHex :: Acronaze32 (3 min 21 sec)


Here's mine

Setup: RCX 1804 2300kv, RCX10A G-Series, 5030, 3s 2200mah 25C, Acronaze32, Boscam TS351 200mW VTX, Sony Super HAD CCD 600TVL Super Mini Camera 2.1mm


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold RD290 CF Mini Hex + 6 arm kit + Acro Naze + Mini PDB + BS 12A ESCs TPSreports Aircraft - Electric - Multirotor (FS/W) 0 Dec 08, 2014 11:56 AM