Thread Tools
Apr 20, 2004, 07:52 AM
Capt. Dennis
ReasonSwe's Avatar

building my own...thing that i think can fly =)


dont really know if this is the right place to put this thread.
so, if itīs on the wrong place, then you can move it to the right. =)

well.. over to what iīm gonna wright about.

iv been looking around here in sweden after Depron, but its much to expensive to buy and ship it to my place.

so yesterday(monday 19/4) we hade our usual buildingday at our local Rc-Club, so i snopped(right word for it? ) there and found a elev in white-foam, aprox 60cm spann.
thought that it could be a good mainwing to my project.

so today i started to build in my...thing.
wasīnt sure what motor i would use for it.. i hade one from my GWS F4U Corsair that i could use, but i thought it would be to big for the plane.
and then i hade 2engines from a CCEP LuckyStar. but one prop was broken, so i could just use the one that was Ok...
but...after some thinking i decided to take the GWS motor..
because _IF_ it would fly, i maby could make some coole manuvers with a bigger engine.

so the system iīll be using is:
some GWS engine + gearbox
GWS 100 ESC
2x8.4g servos
GWS 5channel RX
1300mAh(or was it 1200) 7.2V Li-Pol

it will have just elevon(ail and elev at the same..thingy) and throttle, so i really hope this thing will fly.

and some photos


Setup No:1


Setup No:2, but ill bee using No:1
Last edited by ReasonSwe; Apr 20, 2004 at 07:55 AM.
Sign up now
to remove ads between posts
Apr 20, 2004, 07:53 AM
Capt. Dennis
ReasonSwe's Avatar
something like this í think itīll look like when im finished.
buit alla the mechanical is missing


i think the wingspann is abit to..smal, so i cut of the wingtipps from my Corsair so now itīll be about 15-20cm bigger








more pics will come.
Apr 20, 2004, 10:11 AM
Capt. Dennis
ReasonSwe's Avatar
just glued the vertical fin.


used the glue that comes with all GWS-foamis.


made my own prop-savier


nice and very...orange.


first "winglet" glued


wow.
Apr 20, 2004, 03:08 PM
Capt. Dennis
ReasonSwe's Avatar
now the..."Thing" is ready. think iv got a name for it to
well, itīs not a beauty but..hopefully sheīll fly for awhile.

the maiden can be tomorrow, if just the weather is fine and if my GF is comming over(sheīs gonna record the maiden )
hm.. well.. more of it tomorrow then. =)

here are some pictures and one movie at the bottom.











Film: http://home.tiscali.se/blackbird/specbygg/DSCN4061.MOV
Apr 20, 2004, 04:16 PM
Registered User
vintage1's Avatar
These are the best planes ever.

A few bits of foam and balsa thrown together. What hapens is they don't fly too god, so you add a bit here, take a bit off there, and then they do!

I made a chuck glider for a friends kid - decorated it with colored film, stuck stars and stripes decals on it...and he played with it all weekend.

This is a radio controlled powered chuck glider!!!

It will fly.
Apr 20, 2004, 04:23 PM
Capt. Dennis
ReasonSwe's Avatar
hehe
if dont fly at once. it will fly later. =) just like you said. hehe
Apr 20, 2004, 05:01 PM
Dizzying Heights
SargeNZ's Avatar
I love it!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
M.A.D.F.U.N.Z: Model Aircraft Designers from New Zealand


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Building my own packs shawnr Batteries and Chargers 4 Nov 30, 2004 01:58 AM
Building my own EPP flying wing soholingo The Builders Workshop 4 Apr 28, 2004 11:50 PM
Scratch Building My Own Bird Dog Rogerdoger Parkflyers 78 Feb 03, 2004 12:47 PM
thinking of building my own newtonian telescope logan5 Life, The Universe, and Politics 23 Aug 29, 2003 09:55 PM
Building my own NIMH packs? JayParke Power Systems 5 Oct 17, 2001 09:18 PM