Shop our Airplanes Products Drone Products Sales
Thread Tools
Dec 30, 2001, 05:46 PM
Registered User
Daren's Avatar

F-4 Phantom II - First look...


I've just finished cutting the kit for my F-4 Phantom II (about 2.5 hours worth). I've designed this to be an extremely simple and quick building model especially for the many flyers out there with left over parts from the Kyosho T-33s and F-16s but no airplane to put them in. The plans will also include the birch ply mounting flanges which are epoxied to the Kyosho fan unit to make it a bit more orthodox to mount inside an airplane. Converting it to MF480/BL would be an easy modification.

Missing from the picture below are the wing cores (the reason the cutting on bulkheads F-5 & F-6 isn't quite finished yet), wing skins, top sheeting and nose block(s).

Basic specs are:

Length: 49 inches
Wingspan: 29 inches
Wing area: 345 sq. in.
Projected weight: 32 oz.
Projected wingloading: 15 oz./sq. ft.
Power: Kyosho Fan/AP-29L
Batteries: 7- CP1300 (250W)
Bulkheads: Lite Ply
Fuse & tail feathers: Balsa
Wings: Balsa sheeted foam cores w/ailerons

In the near future I will place a page online with the numerous (And I mean numerous!) cool paint jobs I've found for the Phantom. I'll post more pics later, but for now, it's back to the shop to start building. Yee Haw!

Daren


Last edited by Daren; Mar 17, 2002 at 09:41 PM.
Sign up now
to remove ads between posts
Dec 30, 2001, 06:03 PM
3D Toy Designer
MicroRotors's Avatar
Hi Daren,

This place is having such a hard time displaying images, so you might want to post them over at Silent Flight Online over in the image base.

Bill
Latest blog entry: My New Toy!
Dec 30, 2001, 06:06 PM
Registered User
Daren's Avatar
Quote:
Originally posted by MicroRotors
Hi Daren,

This place is having such a hard time displaying images, so you might want to post them over at Silent Flight Online over in the image base.

Bill
Hi Bill,
Thanks for the offer. I'm hosting them on my site and linking to them from here so it shouldn't be a problem.

Daren
Last edited by Daren; Dec 30, 2001 at 06:08 PM.
Dec 30, 2001, 06:09 PM
steve neill
steve neill
Guest
Looking great Daren!
Steve
Dec 30, 2001, 06:16 PM
3D Toy Designer
MicroRotors's Avatar
Hi Daren,

What is the sites address, because all I get is boxes with the Red X showing up here.

Bill
Latest blog entry: My New Toy!
Dec 30, 2001, 06:54 PM
Registered User
SteveB's Avatar
Bill,
I had the same problem here. Tried the old right mouse click and looked at properties for one of the pictures. (Note: This will get you real close when you run into this again) I came up with http://www.allaboutguppys.com/f-4/f-4_dc3b.jpg%20width=
. Just delete % and everything after it. That will get you to picture f-4_dc3b.jpg. Back it up to http://www.allaboutguppys.com/f-4 and you'll get the root directory with 4 pictures in it.
Dec 30, 2001, 07:30 PM
Registered User
Daren's Avatar
Sorry guys. I recently had a problem with Network Solutions. Those who were having problems are probably on a DNS which is a bit slower to propagate. You shouldn't have any problems now.

Steve,
Thanks for the kind words. Hopefully, I should have this ready in time for the MWE.

Daren
Last edited by Daren; Dec 30, 2001 at 07:58 PM.
Dec 30, 2001, 08:04 PM
3D Toy Designer
MicroRotors's Avatar
Hi Daren,

I followed Steves directions and I was able to view it there. Looks really nice, slap her together now and and shoot some more pictures.

BTW- who did the laser work and what did it run yeah?

Bill
Latest blog entry: My New Toy!
Dec 30, 2001, 08:10 PM
EDF Jet Jam 2017, June 15-18
Kevin Cox's Avatar
Looks good Daren!


Mind if I offer a little heads up on F-4s? I've built two a big one and a small MF480 one. The model lands nose high. That's good. Since it lands nose high the tail hits first. That's bad. The stabs are the first to meet mother earth and it can break them off or the whole tail section just in front of the vertical fin. That's ugly

Some reinforcement may be required.
Dec 30, 2001, 08:15 PM
EDF Jet Jam 2017, June 15-18
Kevin Cox's Avatar
Oh yeah,

This is my favorite Double Ugly site.

http://www.vogue-web.ch/f4/
Dec 30, 2001, 08:16 PM
Registered User
Daren's Avatar
Quote:
Originally posted by MicroRotors
BTW- who did the laser work and what did it run yeah?
Bill
Thanks Bill. I'm planning on slappin' this one together as quickly as possible. BTW, that's no laser. Cuts by me (with a little help from Dremel!).

Thanks for the head's up Kevin. The stabs are glued and fiberglass is drying even as we speak!

Daren
Dec 30, 2001, 08:19 PM
Registered User
Daren's Avatar
Quote:
Originally posted by Kevin Cox
Oh yeah,
This is my favorite Double Ugly site.
Thanks, I've been there, too. To break the stabs off, it must be landing pretty nose high! Breaking the tail off doesn't sound like too much fun, either.

Daren
Dec 30, 2001, 10:05 PM
Registered User

Absolutely, positively gotta have one


I've wanted a DF F-4 since I saw plans for an IC Phantom years back in RCM (I think). Please put me on the list for plans/kit! If there's no list, start one please and put my name up top!

Gotta have one
Dec 31, 2001, 03:59 AM
Registered User
Daren's Avatar

Re: Absolutely, positively gotta have one


Quote:
Originally posted by JimF
I've wanted a DF F-4 since I saw plans for an IC Phantom years back in RCM (I think). Please put me on the list for plans/kit! If there's no list, start one please and put my name up top!
Gotta have one
Hi Jim,
If I recall correctly, that was the diesel powered one, correct? There's no list at present, but when there is I can make you number two; I'm number one.

Daren
Dec 31, 2001, 08:50 AM
Vice President at MultiGP
Admiral_Red's Avatar
Hmmm Daren, if there is room to put a KY in there, would there be a way to jam two fans units of sometype in there?

James


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product 6mmFlyRC-F-4 Phantom II CBflyguy Pusher Prop Jet Models 602 Apr 17, 2016 11:31 PM
F-4 Phantom II for a first timer? aeroplancek Pusher Prop Jet Models 3 Dec 16, 2005 08:58 AM
For Sale Yellow Aircraft F-4 Phantom II - NIB skyhawk Aircraft - Fuel - Airplanes (FS/W) 6 Aug 23, 2005 07:00 PM
Parkflyer F-4 Phantom II Astrix Parkflyers 0 Jun 06, 2005 07:44 PM
Midi F-4 Phantom II construction jet_jer Electric Ducted Fan Jet Talk 34 May 05, 2003 03:58 PM