Thread Tools
Apr 09, 2004, 07:29 PM
Registered User
Thread OP

GWS A-10 Brushless A10


I've hesitated building mine for almost a year after hearing all the complaints of it being underpowered so I decided to go brushless right from the start. I have yet to maiden plane but from test running the fans on my workbench, this should have no problem flying with authority.
I'm using:
EDF 55 upgrade with Himax 2015-3600 motors
C.C. Phoenix 10 speed controls
Berg 4 microstamp receiver
Tanic 3s1p 2200 battery

Each motor is pulling about 9 amps.
I hollowed out area under canopy and placed battery there to find the center of gravity.
I hope to have some video soon. Jim

www.jims-rc-flight.com
Sign up now
to remove ads between posts
Apr 09, 2004, 07:29 PM
Registered User
Thread OP
.
Apr 09, 2004, 07:30 PM
Registered User
Thread OP
..
Apr 09, 2004, 07:31 PM
Registered User
Thread OP
...
Apr 09, 2004, 07:31 PM
Registered User
Thread OP
....
Apr 09, 2004, 07:32 PM
Registered User
Thread OP
.....
Apr 09, 2004, 08:46 PM
Registered User
I have a video of this setup, just cant host it.
Apr 09, 2004, 08:52 PM
RCAPA Member #39
Nik-rc's Avatar
will do that for you, send it to me to [email protected], if less than 8 megs...
-Nik
Apr 09, 2004, 09:14 PM
living in Japan member
do you know how much this setup weights?

thx
wim
Apr 10, 2004, 11:46 PM
Registered User
I sent the viseo but it was returned its under 8 meg


Quick Reply
Message:

Thread Tools