HPI/Hot Bodies D8S nitro 1/8-scale - RC Groups

HPI/Hot Bodies D8S nitro 1/8-scale

Proven race buggy now offered as a Ready-To-Run (RTR)


World champion quality, RTR efficiency!

If you are an off-road racer, then you are familiar with the success that the Hot Bodies D8 1/8-scale 4WD nitro buggies have enjoyed. If you wanted to race one, you had to build it yourself because it was only offered as a kit. Now HPI/Hot Bodies has rectified this situation and have released a hardcore RTR version built on the D8 kit. It is equipped with HPI radio gear and uses a HPI Nitro Star F3.5 .21 engine to provide the power.


  • Nitro Star F3.5 (.21 c.i.) pullstart engine
  • 4-wheel shaft drive
  • Complete 2.4GHz 3-channel radio system
  • SB-5 steering servo
  • SF-10W waterproof throttle/brake servo
  • 3mm aluminum chassis
  • Cast aluminum engine mount
  • Composite chassis braces
  • Oil-filled gear differentials
  • Spiral-cut diff gears
  • Adjustable dual fiber disk brakes
  • Secure receiver & battery box
  • Solid suspension arms
  • Front universal dogbones
  • Oil-filled HB aluminum Big Bore shocks
  • Inverse steering block design front
  • Steel turnbuckles
  • Adjustable roll center, wheelbase, camber and more
  • HB racing wheels and tires
  • Aluminum shock towers with multiple shock positions
  • Counter-rotating shock mount screws
  • Easy access to maintenance points
  • Dual bellcrank steering
  • Fuel tank with internal baffles and clunk
  • Socket head hardware
  • Full rubber-sealed ball bearings

HPID0918 459.99

Learn moreóHPI/HOT BODIES!

Thread Tools

Thread Tools