Thread Tools
This thread is privately moderated by CarreraGTSCS, who may elect to delete unwanted replies.
May 02, 2014, 02:16 PM
Lori, hey, you're home early
CarreraGTSCS's Avatar
Thread OP
Discussion

Split elevator set up JR 9303


Found this here on RCG:

Plug one side of the elevator into the ELEV channel and the other side into the AUX 3 channel. Go to System Menu and choose Wing TYPE. Jog over to the Mate line under ELEV and push the roller. A box will appear with 4 choices: GEAR, AUX2, FLAP & AUX3, choose AUX3. You have just mated the AUX3 channel with the Elevator channel; the radio will now automatically refer to these channels as REL (right elevator) and LEL (left elevator) in all menus.
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools