|
|
|
Simplecopters flight ready.
|
|
|
|
|
|
|
Love to see some flight video.
|
|
|
|
|
|
I wish we had a kk2 type easy to use board with
Nase 32 performance at sub $40 price. All the new boards are a pain and don't support tricopters. Kk2 boards are getting hard to find now. |
|
|
|
|
|
I ran into a lot of issues over the last year with flight control boards for the tricopter. I have used the KK boards and they work and you can change values to make them more to your liking. For me though I didn’t get my best performance from these. I am sure it was my lack of understanding of setting it up as others have had good success with this board.
Then I started to use the naze board with Cleanflight with very good success. When the Ceanflight and Betaflight programming changed in the beginning of 2017 I then had serious issues. It made programming one of these boards near impossible for me. CLI command changes were needed to use these and computer programming is not my strong suit. I finally stumbled onto using the CC3D boards with Inav programming. All I can say is they are really inexpensive at Banggood and they set up super easy with the Inav wizard. Since going this route I have built 3 more tricopters for other people with great success. The CC3D is a simple board that only does very basic control functions. There is a higher level, more expensive, version if you choose to have more features. I have not used the more advanced board as all of my builds to date have been make cheap, make it fly good, and fly like you stole it. |
|
|
|
|||
|
Simplecopter V-Tail 3D Flying
This is a video of my recently built Simplecopter V-Tail for 3D Flying
I used reversible ESCs and 3D propellers It still needs some tuning but it is already a lot of fun to fly.
|
||
|
|||
|
|
|
So cool I am so jealous.
|
|
|
|
|||||
|
Falcon Flight Controller VideoQuote:
Ouch, I hope it ended well? Quote:
|
||||
|
|||||
|
|||
|
I Finnish up building a mini tail last weekend have got to fly it a few times in the backyard. The weather here isn't good for flying, but I plan on putting FPV gear on it.
|
||
|
|||
|
|
|
Plenty of snow out but temps are well above zero this weekend. Got the gopro case on the T copter for some filming mischief in spring.
|
|
|