Thread Tools
This thread is privately moderated by Jim.Thompson, who may elect to delete unwanted replies.
Apr 09, 2014, 12:30 AM
Entropy is happening!
Jim.Thompson's Avatar
Thread OP

Another foam plank build...

These pictures show how I build the box section fuselages - I hope!
The EPP beds that the foam cores come in is cut down to 10mm sheets using a hot wire and a couple of spacers on the bench.
After the sides and top are cut out, I line the inside with 80/20 glass and epoxy.
The wood that I'm using for the bulkheads is recycled Douglas Fir venetian blinds that I have cut into strips. These are glued together and first tacked in with CA.
The final assembly is done with PU glue.
Sign up now
to remove ads between posts

Quick Reply
Thread Tools