Thread Tools
Mar 24, 2004, 10:13 PM
Registered User
nose_first's Avatar
Thread OP

can this easily be done to my pack?


i have a couple GWS 7 and 8 cell nimh packs that i would like to convert as follows;

from:
OOOOOOOO

to:
OOOO
OOOO

to me it seems easy to do - just rip open the pack and re-wrap - but i wanted to make sure this could be done without too much surgery or if anyone has opened one of these packs.

thanks
Jeff
Sign up now
to remove ads between posts
Mar 24, 2004, 10:21 PM
characters welcome!
Mark Wood's Avatar
Used to so it all the time with RS1600AA packs and still do occasionally with GWS 8x720s. You might rip a bit of the shrink on the individual cells but that's easily enough repaired/insulated.

mw
Mar 24, 2004, 10:23 PM
Registered User
nose_first's Avatar
Thread OP
thanks mark - i figured it would be easy - but i didnt want ot hack it open and mess up its pretty looks
Mar 25, 2004, 07:01 AM
Registered User
Andy W's Avatar
I posted this a long time ago. It's not the same configuration as you are looking for, but it may give you some ideas..
..a
Mar 25, 2004, 09:30 PM
characters welcome!
Mark Wood's Avatar
Andy's link is where I learned to do it ages ago.

mw


Quick Reply
Message:

Thread Tools