Mar 20, 2004, 10:06 PM
Registered User

Can someone please tell me how


to hook up a new connector to my Hitec flash 5 wall charger? I want to cut off the standard connector that plugs into the tx and add a connector that will charge the battery while removed from the tx. The wires to the standard connector are both black, but one has long white dashes on it. Does this one go to the red or the black wire on the new connector? Thanks in advance for any help. JDD
Sign up now
to remove ads between posts
Mar 20, 2004, 11:02 PM
Dead stick!!
Peter Young's Avatar
I don't know the answer, but I'm curious as to why you want to do this?
Mar 20, 2004, 11:12 PM
Been There! Done That!
boomerace's Avatar
Make an adapter.... get the Female plug from Radio Shack then you can plug and unplug it for charging your TX. Center is plus outside is negative.
boomer
www.boomerseflight.com
Mar 21, 2004, 08:52 AM
Registered User
PY- Iwanted to be able to slow charge a tx battery(I have 2) and still use the tx with the other battery. The slow charger takes about 15 hours.

Boomer- Thanks for that info; that's exactly what I needed to kn ow. And, by the way, thanks for your valuable contribution to the SSBOK (Slowstick Book Of Knowledge) which has enabled me to (starting from scratch and knowing nothing):
1. Choose a great plane as a gift for my son.
2. modify it to be almost bulletproof.
3.Learn how to fly it in spite of a warped wing we eventually
discovered and fixed.
4. had a great time doing it all.
Your help is much appreciated.
JDD
Mar 22, 2004, 07:34 PM
Lookin' Good. Real Good.
larsy87's Avatar
Is the model memory in Flash5(if yours is a computer) non-volatile? If I remember right, having volatile memory means you'll lose all your model data when you remove your battery.
Mar 22, 2004, 08:07 PM
Been There! Done That!
boomerace's Avatar
Quote:
Originally posted by Cam Galbraith
Is the model memory in Flash5(if yours is a computer) non-volatile? If I remember right, having volatile memory means you'll lose all your model data when you remove your battery.
Cam,
Removing Battery No problem!
boomer
www.boomerseflight.com


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Alert can someone please help me setup my Heli-Max gyro? crx_ef8 Electric Heli Talk 0 Nov 25, 2003 07:58 PM
Gyro ttrouble please can someone please help me??? zetex Micro Helis 5 Sep 15, 2003 09:51 PM
Someone please tell me about these NMH Batterries... KZZ Batteries and Chargers 2 May 16, 2003 08:12 PM
Help!! Can someone please tell me how to hook up a twin in paralell? Joe Elston Power Systems 6 Oct 22, 2001 06:37 PM