Thread Tools
This thread is privately moderated by jjmelo, who may elect to delete unwanted replies.
Old Feb 26, 2014, 11:24 PM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
$50.00 USD
Seller Pays Shipping
For Sale

Mini Crow - 3D Printed Mini H Quad + hardware


Introducing the Mini Crow, a 3D printed Mini Quad frame, in an H configuration, that makes it perfect for FPV. I print these frames myself using black ABS plastic. The frame itself is very light and strong. I built my prototype using Aoxing 2100KV motors, 3 blade 5030 Gemfan props, 10A ESCs and a CC3D controller. To keep it light, Iím using 1,000 mah 3S Lipos (6 minutes aggressive flight). Here's a video of my flying one (more tuning required).

Mini Crow - 3D Printed Mini H Quad (1 min 26 sec)


These frames are $50 (including shipping to the US) and I include all the hardware (nylon mounts and the machine screws and nuts to bolt it together). I'm selling them directly on my site, link below. Just use the Buy It Now button and to be redirected to PayPal.

http://www.flitereport.com/store/min...-quad-for-fpv/
RCG Plus Member
Last edited by jjmelo; Feb 26, 2014 at 11:30 PM.
Sign up now
to remove ads between posts
Old Feb 27, 2014, 02:35 AM
pinoydad is offline
Find More Posts by pinoydad
Trader Rating: 15
Registered User
i like it ..
Old Feb 27, 2014, 06:25 AM
Waterbound is offline
Find More Posts by Waterbound
Trader Rating: 124
Registered User
Will these fit zmrs or suppos a1510s?
RCG Plus Member
Latest blog entry: Hubsan H107D Custom FPV Setup
Old Feb 27, 2014, 06:35 AM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
The mounting pattern on the arms is 15x12 or 12x12. I can easily modify the mounting pattern for the motor to 13x13mm, which is the pattern for those motors. Just leave a note and I'll print the arms like that, no problem.
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Old Feb 27, 2014, 09:06 PM
NAUJK is offline
Find More Posts by NAUJK
Trader Rating: 8
Registered User
I like this. I am really thinking about it... great proximity low level flying platform. Bit bigger than the Blackout. Any other suggestions for motors for it?
Old Feb 27, 2014, 09:13 PM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
These motors are awesome. https://www.rcgroups.com/forums/show....php?t=2112708
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Old Mar 07, 2014, 03:01 AM
DirtyDovi is offline
Find More Posts by DirtyDovi
Trader Rating: 9
Registered User
DirtyDovi's Avatar
I am super-stoked to have run across these frames!
Last week I talked to jjmelo about one,
and this week, I have mine in hand!

Julian went above and beyond,
and these frames are amazing!

If there is anyone that is interested in these,
but 'still thinking about it' - Just pull the trigger!

Thank you again J, You da' man! *Thumbs Up*



Sam -

PS:

Link to my blog - Mini Crow Mock-Up / Build:
https://www.rcgroups.com/forums/member.php?u=474437

And a few pics -
Old Mar 08, 2014, 10:39 PM
bennymack is offline
Find More Posts by bennymack
Trader Rating: 12
Registered User
Wow! I like it! You linked to x2204's so I'm guessing you can print these to work with their bolt pattern (19mm I think?). Will 6 inch props work?

Edit: ahh saw on your page that 6" are supported. This is definitely on my short list!
Old Mar 08, 2014, 10:41 PM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
6" props will work. I can print it for any bolt pattern. I customized DirtyDovi's to 12 x 12mm.
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Old Mar 08, 2014, 11:34 PM
DirtyDovi is offline
Find More Posts by DirtyDovi
Trader Rating: 9
Registered User
DirtyDovi's Avatar
Progress!



Build info and pics:

https://www.rcgroups.com/forums/show....php?t=2119250
Old Mar 15, 2014, 09:44 PM
bennymack is offline
Find More Posts by bennymack
Trader Rating: 12
Registered User
Does this have holes for 36mm FCB with the 30.5mm bolt hole patterns? Or is that just a special request like with the x2204 motor holes? I found some motors and ordered them by the way. I'll probably be pulling the trigger on this guy shortly.
Old Mar 17, 2014, 03:14 AM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
You can bolt down a KK 2 ....that's 50x50mm. I can make the holes in custom places if you'd like.
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold 3D Printed Mini H-Quad G-unit Aircraft - Electric - Multirotor (FS/W) 2 Feb 21, 2014 02:03 PM
For Sale Mini Crow - 3D Printed Mini H Quad + hardware jjmelo Aircraft - Electric - Multirotor (FS/W) 6 Feb 19, 2014 09:17 PM
For Sale Mini Crow - 3D Printed Mini H Quad jjmelo Aircraft - Electric - Multirotor (FS/W) 8 Feb 17, 2014 08:58 AM
For Sale Mini 3D Printed H-Quad G-unit Aircraft - Electric - Multirotor (FS/W) 9 Dec 31, 2013 01:13 PM
Discussion 3d printed Mini H frame of POLAKIUM Engineering 1sq Mini Multirotors 0 Oct 23, 2013 12:37 AM