Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by eich, who may elect to delete unwanted replies.
Mar 17, 2004, 05:39 PM
Trader Rating: 6
Registered User

WTB: 2M class foam wing


I would like to buy a 2 meter class foam wing (70"-85"). Doesn't have to be anything fancy, but cheap and good condion are a plus. Drop me a line if you have one sitting around or can make one up easily. Thanks.

Andrew
Sign up now
to remove ads between posts
Mar 17, 2004, 08:09 PM
Trader Rating: 17
ADDICTED TO LIFT
glider34's Avatar
You can Purchase RA Cores 2 M wing Kit for a Spirit or Gentle Lady but they have to be built. $35 or $40. racores.com

For higher peformance Art Hobby Sells wings that would cost near $80 -$100. arthobby.com

Good Luck
Mar 18, 2004, 10:37 PM
Trader Rating: 27
Registered User
Hi,

I have two sets of 2 meter wings. RG 15 airfoil, pressed with real nice obechi, and a nice spar. Cord is 8.5" at the root and 6.5" at the tip. The spar is hard balsa with carbon fiber top and bottom.

These wings are out of the press and trimmed. You will need to add the leading edge (normally bass or spruce) and cut out the ailerons (and flaps too if you so desire).

The wings sold for $175.00 each from Flitelite. I am asking $75 for one wing or $125 if you want them both.

PM me if you need more info.
Dave
Mar 18, 2004, 10:44 PM
Trader Rating: 27
Registered User
After reading my post....

The picture above shows one wing, the right and left sides. ($75)

If you want both wings you get two lefts and two rights ($125)

Here is the root showing the spar.
Mar 20, 2004, 02:00 AM
Trader Rating: 1
Registered User

Re: WTB: 2M class foam wing


Quote:
Originally posted by eich
I would like to buy a 2 meter class foam wing (70"-85"). Doesn't have to be anything fancy, but cheap and good condion are a plus. Drop me a line if you have one sitting around or can make one up easily. Thanks.

Andrew
Hello Andrew!
I can help you!
Les
"Compufoamcore.com"
Mar 20, 2004, 06:42 AM
Trader Rating: 38
karma...its not all good
xterra's Avatar

Wing


I have a wing from an Omega 636. It has ailerons. Here is a link to a page that shows the 636. If interested I can mail them to you for $40.00 shipped. I can send a photo of the wings if you like. I can check but I think it is foam with sheeted balsa covered with Oracover.

XT

Thread Tools