New Products Flash Sale
Thread Tools
This thread is privately moderated by jjmelo, who may elect to delete unwanted replies.
Old Feb 17, 2014, 08:32 PM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
$50.00 USD
Seller Pays Shipping
For Sale

Mini Crow - 3D Printed Mini H Quad + hardware


Introducing the Mini Crow, a 3D printed Mini Quad frame, in an H configuration, that makes it perfect for FPV. I print these frames myself using black ABS plastic. The frame itself is very light and strong. I built my prototype using Aoxing 2100KV motors, 3 blade 5030 Gemfan props, 10A ESCs and a CC3D controller. To keep it light, Iím using 1,000 mah 3S Lipos (6 minutes aggressive flight). Here's a video of my flying one (more tuning required).

Mini Crow - 3D Printed Mini H Quad (1 min 26 sec)


These frames are $50 (including shipping to the US) and I include all the hardware (nylon mounts and the machine screws and nuts to bolt it together). I'm selling them directly on my site, link below. Just use the Buy It Now button and to be redirected to PayPal.

http://www.flitereport.com/store/min...-quad-for-fpv/
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Sign up now
to remove ads between posts
Old Feb 17, 2014, 08:47 PM
bajacrazy509 is offline
Find More Posts by bajacrazy509
Trader Rating: 2
Registered User
bajacrazy509's Avatar

Mini Crow - 3D Printed Mini H Quad + hardware


Sweet
Great price
What's the AUW?
Are you going to do a clean and dirty section ?
Thanks
Old Feb 17, 2014, 09:06 PM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
On that 4th picture you see the weight. 362g. You could do a dirty/clean mod with dampeners
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Old Feb 17, 2014, 09:36 PM
Somethin' Extra is offline
Find More Posts by Somethin' Extra
Trader Rating: 43
**** this ****
Somethin' Extra's Avatar
Will it carry a mobius?
Old Feb 17, 2014, 09:54 PM
actionplus is online now
Find More Posts by actionplus
Trader Rating: 89
Registered User
Yup. It would.
Old Feb 17, 2014, 10:01 PM
Somethin' Extra is offline
Find More Posts by Somethin' Extra
Trader Rating: 43
**** this ****
Somethin' Extra's Avatar
But will it blend? (Sorry couldn't resist)
Old Feb 19, 2014, 09:17 PM
Wolphe is offline
Find More Posts by Wolphe
Trader Rating: 1
Registered User
Wolphe's Avatar
I might be interested in this. Can you Link the parts you use to your build for your frame? Or PM me with it. Looks fascinating.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Mini Crow - 3D Printed Mini H Quad jjmelo Aircraft - Electric - Multirotor (FS/W) 8 Feb 17, 2014 08:58 AM
Sold 3D printed and Aluminum constructed Knuckle H-Quad fdaremi Aircraft - Electric - Multirotor (FS/W) 3 Feb 16, 2014 11:31 PM
For Sale Mini 3D Printed H-Quad G-unit Aircraft - Electric - Multirotor (FS/W) 9 Dec 31, 2013 01:13 PM
Discussion 3D printed GoPro Anti Jello Wire Rope Isolator Mount for my 3D H-Quad NuttyBar Scratchbuilt Multirotors 1 Dec 23, 2013 11:36 AM
Discussion 3d printed Mini H frame of POLAKIUM Engineering 1sq Mini Multirotors 0 Oct 23, 2013 12:37 AM