Thread Tools
This thread is privately moderated by jjmelo, who may elect to delete unwanted replies.
Old Feb 16, 2014, 06:50 PM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
$50.00 USD
Seller Pays Shipping
For Sale

Mini Crow - 3D Printed Mini H Quad


Introducing the Mini Crow, a 3D printed Mini Quad frame, in an H configuration, that makes it perfect for FPV. I print these frames myself. The frame itself is very light and strong, coming in at only 73g. I built mine using Aoxing 2100KV motors, 3 blade 5030 Gemfan props, 10A ESCs and a CC3D controller. To keep it light, Iím using 1,000 mah 3S Lipos. Here's a video of my flying one (more tuning required).

Mini Crow - 3D Printed Mini H Quad (1 min 26 sec)


These frames are $50, shipped in the US, payment via PayPal, using my site. Please go to the following link, for more details. To pay, just click the Buy It Now button and proceed onto Paypal. If you have any questions, please let me know.

http://www.flitereport.com/store/min...-quad-for-fpv/
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Sign up now
to remove ads between posts
Old Feb 16, 2014, 08:29 PM
TMAC4123 is offline
Find More Posts by TMAC4123
Trader Rating: 11
God is Good
TMAC4123's Avatar
What flight time do you get on these?
Old Feb 16, 2014, 08:33 PM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
About 6 minutes of aggresive flying on a 1,000 mah 3S.
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Old Feb 16, 2014, 11:16 PM
318wagner is offline
Find More Posts by 318wagner
Trader Rating: 49
Registered User
Hi,is hardware included,if not where can I find it online to see what it will cost.thanks
Old Feb 16, 2014, 11:39 PM
helifrek is offline
Find More Posts by helifrek
Trader Rating: 129
3D Printing Enthusiast
helifrek's Avatar
Very nice design. I don't suppose you would be willing to share the stl file would you? You gotta love 3d printing!
Old Feb 16, 2014, 11:54 PM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
Hardware is not included. You need 4 x 30mm M3 Nylon Threaded Spacer, get them at HK USA for $3 for a set of 10.

You also need about 12 16mm M3 screws and about 20 M3 nuts. You should be able to get all these at Home Depot or Lowes.

http://www.hobbyking.com/hobbyking/s...803&aff=177452

Quote:
Originally Posted by 318wagner View Post
Hi,is hardware included,if not where can I find it online to see what it will cost.thanks
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Old Feb 16, 2014, 11:54 PM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
I'll share the design in a few weeks or so.

Quote:
Originally Posted by helifrek View Post
Very nice design. I don't suppose you would be willing to share the stl file would you? You gotta love 3d printing!
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing
Old Feb 17, 2014, 07:10 AM
Waterbound is offline
Find More Posts by Waterbound
Trader Rating: 124
Registered User
Are these made of ABS, PLA etc? Hopefully ABS for strength. Different colors? Plans to offer with necessary hardware?
RCG Plus Member
Latest blog entry: Hubsan H107D Custom FPV Setup
Old Feb 17, 2014, 08:58 AM
jjmelo is offline
Find More Posts by jjmelo
Trader Rating: 116
Registered User
jjmelo's Avatar
Forgot to mention this important detail: its ABS for strength. Right now, just black. I'm considering offering it with all the hardware, but not for the moment.

Quote:
Originally Posted by Waterbound View Post
Are these made of ABS, PLA etc? Hopefully ABS for strength. Different colors? Plans to offer with necessary hardware?
RCG Plus Member
Latest blog entry: The 'Nocchio - 22" FPV Wing

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Mini 3D Printed H-Quad G-unit Aircraft - Electric - Multirotor (FS/W) 9 Dec 31, 2013 01:13 PM
Discussion 3D printed GoPro Anti Jello Wire Rope Isolator Mount for my 3D H-Quad NuttyBar Scratchbuilt Multirotors 1 Dec 23, 2013 11:36 AM
Sold Mini 3D Printed Quad $30 shipped G-unit Aircraft - Electric - Multirotor (FS/W) 3 Dec 02, 2013 09:51 AM
Sold Mini 3D Printed Quad $25 shipped G-unit Aircraft - Electric - Multirotor (FS/W) 14 Nov 27, 2013 07:21 PM
Discussion 3d printed Mini H frame of POLAKIUM Engineering 1sq Mini Multirotors 0 Oct 23, 2013 12:37 AM