|
|
|
|
A regrettable error : I posted 2 threads with the same subject...... how can I delete one of them ?
MARIUS |
|
|
|
|
|
As far as I know their isnt a delete button, just erase all the text from this thread and replace it with something like --accidental duplicate post--
Michael |
|
|
|
|
|
OK . THANK YOU ,
But I think is not right , and may be is going to be fix one day ! . At least can I CLOSE it ? ( like the one when You sold something ) MARIUS |
|
|
|
|
|
Marius,
Normally I would say Mtroniks ESC, but I also like Microgyro's controller here: http://www.microgyros.com/index.html |
|
|
|
|
|
What would You recommend from Mtroniks ?.
MARIUS |
|
|
|
|
|
My BELOVED colleges I know is too soon for these stage of my project but I hope there wheel the time when I'm gonna need some Decals for my sub.
So there is some questions rising : 1) every type of subs has a different Decals ? 2) is necessary to buy a particular decals , for example My Los Angeles , or there are some general witch can be used , and by choosing what to put on them is what determine the particularity of a specific one?. 3) and of course where can be bought at decent price all of these ?. Can You show me some pictures about what/where/how did You put Your Decals on Subs?, or guide to another place where I can find these answers . THANK YOU MARIUS |
|
|
|
|
|
Good Evening ,
- I advanced a little bit with component arrangement in WTC .... - I mounted on a speed controller and receiver a piece of Velcro , and on PVC bracket also..... - I put thicker wires to the motor .... - I don't know what connectors to use for coupling the motor with speed controller and for connecting the battery to the speed controller .... - I have not forgotten either the fuse that protects the receiver or the main switch , - I am most interested about what capacity should have receiver battery power ..... now I have 4,8 V = 4x1, 2V/2100mA - NiMh Accumulators ... - is enough to power the receiver? ..... - if yeah, that autonomy would be? ... I have some questions : - what methods are most commonly used to isolate the power supply wires from the battery when they enter in the WTC ? ; - can I put Sealed Lead Acid battery terminals in the in water if it does not fit into the WTC ? ; - not is discharged or is short circuit? Pictures next days . To day batery is empty MARIUS |
|
|
|
|
|
Salut Marius!
I belive it will be enough for your sub, but please take good care with that brass geared pump, i have used one in the past and the inside seals are not very good, water can easily reach to the motor under pressure. I would recommend using a Kavan geared pump. The Kavan is able to produce 4 to 5 bar without problems. Regards, George |
|
|
|
|
|
SALUT GEORGE ,
Thank You for telling me these . I wheel take care about the pump . I am not decided eat if is going to stay in the same wtc with the rest of the components or in a separate wtc along with Rubber Balloon but separated by a Sealed Wall - with on O-ring . Unfortunately I spent all my Founds and I don't have money for another Pump . MARIUS |
|
|
Thread Tools | |
Similar Threads | |||||
Category | Thread | Thread Starter | Forum | Replies | Last Post |
Build Log | Los Angeles Class, 688i Building Log. | coolmodelguy | Submarines | 147 | Oct 11, 2016 09:32 PM |