New Products Flash Sale
Thread Tools
Old Mar 11, 2004, 12:22 PM
ScubaSteve is offline
Find More Posts by ScubaSteve
Question

auto-calibrate throttle??


According to the instructions for my P-10, if you hit full throttle (LED comes on), but your tx throttle isn't 100%, if you continue to move your tx throttle to 100%, the P-10 will calibrate a new min/max throttle setting...

i get to about 75% throttle on my Tx and the CC P-10 LED comes on, but if I move the throttle to 100%, the P-10 doesn't seem to recalibrate. The LED ALWAYS comes on at that 75%...

am i doing something wrong or misunderstanding? please advise! thx.........
Sign up now
to remove ads between posts
Old Mar 11, 2004, 01:33 PM
Jim McPherson is offline
Find More Posts by Jim McPherson
Just an average RC'er
Jim McPherson's Avatar
You probably have the Phoenix 10 set to fixed throttle, change it to auto-calibrate and that should fix it.

-Jim
Old Mar 11, 2004, 01:34 PM
ScubaSteve is offline
Find More Posts by ScubaSteve
Thanks Jim!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question CC45HV will only arm with Auto Cal throttle and not Gov? helisfreak Castle Creations 5 Oct 21, 2006 10:10 AM
CC phoenix auto calibrate throttle question NCguy Power Systems 12 Sep 27, 2005 10:44 AM
Phoenix 35 - Can't get in Setup mode, stuck in Auto calibrate PFarrand Micro Helis 1 May 08, 2005 10:36 AM
PHX-Link, Motor Noise, and Auto Calibrate no stick Castle Creations 1 Apr 18, 2005 10:26 AM