SuperTroys Ornithopter Project - RC Groups
Thread Tools
Jan 25, 2014, 12:34 AM
Registered User
Discussion

SuperTroys Ornithopter Project


My first Ornithopter Project has been completed.
By that I mean it is in the test flying mode now.

It has a 48 1/2" span and lots of features.

View the following URL for all the updates regarding the project.
http://www.seabreezeparachutes.com/o...pter/view.html

Total weight ready to fly including a 2 cell lipo battery is 16 oz or 454 grams.

Many questions can be answered by reviewing the video updates.
If you still have a question, Just ask. I happy to answer questions.

Here is the
ENJOY!
Last edited by testfly; Apr 04, 2014 at 02:48 PM. Reason: Added link to the page where all the updates can be found.
Sign up now
to remove ads between posts
Jan 25, 2014, 04:43 AM
DIY Mania from Taiwan
can't wait for next vid
regards
Sam
Jan 25, 2014, 06:13 AM
Registered User
therealthing691's Avatar
the more i see the more i like cheers Brian
Jan 25, 2014, 06:39 AM
Kjell Dahlberg
KJELL's Avatar
I like your Gear Guard. Maybe using Nylon screws it is possible to reduce weight.
Every gram is important.
Last edited by KJELL; Jan 25, 2014 at 08:39 AM.
Jan 25, 2014, 09:08 PM
Registered User

Update #5


Quote:
Originally Posted by samwei1950
can't wait for next vid
regards
Sam


Get a drink and the popcorn Sam.
Update video #5 in now playing.
Enjoy
Jan 26, 2014, 02:49 AM
Registered User
therealthing691's Avatar
Is all about bettering a good design .I like better best of luck cheers Brian Also have you come up with say a kit cost or fully made cost or is it still to early for that
Jan 26, 2014, 02:29 PM
Registered User

Picture Update (Finished Tail)


How about picture updates too?

I don't have enough information for a video update. But,
I am happy to share a few images of the Yellow tail I just finished.
The edge carbon rods are inserted into pockets that were stitched. Then clear tape was used to secure the smaller carbon rods. The edge was also covered with clear tape to secure the arched carbon in place. The results are shown in the images.



Jan 26, 2014, 03:03 PM
Registered User

Q & a


Quote:
Originally Posted by therealthing691
Is all about bettering a good design .I like better best of luck cheers Brian Also have you come up with say a kit cost or fully made cost or is it still to early for that
It is a bit early yet.
My goal is to offer a good quality kit / ARF model at a reasonable price.
I figured I would just design and build my own. Then share it with anyone interested. Maybe you can tell from the progress so far. I am passionate about doing things the right way.
It takes time and testing to get it right. I won't rush the project to get it done.
Maybe you can also tell I am happy to share what I am doing.
To me it is more about supporting the hobby than making a dollar.
Live is good. (meaning you get to see this project as it comes together)
Enjoy
Last edited by testfly; Jan 27, 2014 at 01:10 PM. Reason: Live is good. (explained)
Jan 26, 2014, 11:26 PM
Registered User
therealthing691's Avatar
Quote:
Originally Posted by testfly
It is a bit early yet.
My goal is to offer a good quality kit / ARF model at a reasonable price.
I figured I would just design and build my own. Then share it with anyone interested. Maybe you can tell from the progress so far. I am passionate about doing things the right way.
It takes time and testing to get it right. I won't rush the project to get it done.
Maybe you can also tell I am happy to share what I am doing.
To me it is more about supporting the hobby than making a dollar.
Live is good.
Enjoy
To me it is more about supporting the hobby than making a dollar
I agree totally regards Brian
Jan 26, 2014, 11:39 PM
DIY Mania from Taiwan
Quote:
Originally Posted by therealthing691
To me it is more about supporting the hobby than making a dollar
I agree totally regards Brian
good comment Brian
regards
Sam
Jan 28, 2014, 02:54 AM
Registered User

Update #6


Project Update # 6 has been uploaded.
(See the first post of this thread for the video link)



Enjoy
Jan 28, 2014, 05:01 AM
DIY Mania from Taiwan

regards
Sam
Jan 28, 2014, 09:53 PM
Registered User
therealthing691's Avatar
pinion wire for the gear would be a option if you cant find gears that size.Then it would have to be bored out but is a option. AS for the motor it took a bit of searching but hear is the motor http://www.ebay.com/itm/RC-Motor-Hel...item414222393b and bonus its in the USA hope this helps.As for it being 3800kv i cant see it being a issue i have ran as small as a 22mmdia 5000kv on a PH3 and as large as a turnigy e500 4000kv on a slow hawk and that was plenty if not a bit to powerful for it cheers Brian
Last edited by therealthing691; Jan 28, 2014 at 10:35 PM.
Jan 29, 2014, 10:37 AM
Registered User

Pinion selection guide


Thanks for sharing guys. A order has been placed.

Since we are sharing information here...

If your looking for details about Pinion Gear Selection the following URL might be very useful.
http://www.swashplate.co.uk/ehbg-v17/ch30s04.html

Enjoy


Thread Tools