What's on your bench? - RC Groups
Thread Tools
Jan 13, 2014, 06:34 PM
Registered User
Discussion

What's on your bench?


It's winter. So, what are you folks building for next season?

Just finished a NEO DLG and an Art Hobby Thermic so far. Have another 2-meter German glider (that shall remain nameless) that's next up on my bench.

It's very quiet around here. Isn't anyone working on anything?
Sign up now
to remove ads between posts
Jan 13, 2014, 06:57 PM
Old Prop Buster
Sir Dumb Thumb's Avatar
Working on a DJ Aerotech Chrysalis HLG that I am turning into a electric. I can't physically do a DLG glider so this is as close as I get. It is a 1.5 meter all wood RE glider. For $50 it seems like a good deal so far. I am almost done with the wing and on to the fuse probably next week. It is hard to work at the bench when it is 60 degrees outside and light winds. I went and flew my Radian instead of sitting at the bench. Maybedrive a little farther and fly my Oly2 tomorrow, sorry my Canadian flyers.

https://www.rcgroups.com/forums/showthread.php?t=909652

Gary
Last edited by Sir Dumb Thumb; Jan 13, 2014 at 07:03 PM. Reason: Grammar
Jan 13, 2014, 07:40 PM
Registered User
George Franklin's Avatar
Bubble Dancer My Way
126" span
Fir spar
FG over balsa fuselage
Audio variometer

https://www.rcgroups.com/forums/show....php?t=2046466
Last edited by George Franklin; Jan 21, 2014 at 09:15 AM.
Jan 13, 2014, 10:02 PM
Registered User
new v-tail fuselage to go with a set of Spirit wings.....and then a Prophet.
Jan 13, 2014, 11:00 PM
Mfg of the Marauder & Oculus!
Mr B....'s Avatar
I new designed 130" wing with flaps for my ALES Oculus EXL


Merrill
Jan 13, 2014, 11:32 PM
Rob H
rph1225's Avatar
Finally venturing into a true electric setup with a e-supra fuse for my home built Supra wings.
Jan 14, 2014, 09:42 AM
Registered User
Don Stackhouse's Avatar
New UAV design for my day job. A couple new flavors for our Chrysalis family. Some fiddles that need some serious TLC. A 32 string Celtic Harp I designed for my wife. The new mandolin I designed for me.
Jan 14, 2014, 10:29 AM
R2R
R2R
Registered User
R2R's Avatar
Still have my Hi Flight Mirage kit on the bench.
Jan 14, 2014, 02:09 PM
Registered User
An Olympic III that has been laying around a couple years. Waiting to be finished. Getting close to being done!
Jan 14, 2014, 03:59 PM
IT'S NOSE HEAVY!!!!
cityevader's Avatar
a beer
Jan 14, 2014, 04:36 PM
Hot Dawg Glider Pilot
schrederman's Avatar
4.0 Xplorer 2 and the beginnings of a Wood Hawk... more to come on that...
Jan 14, 2014, 05:45 PM
planepainter
planepainter's Avatar
As soon as my workshop is completed, I will rebuild my 134" Bud Riser, again. After that it may be the 2 meter Cherry or restoring my 140" Legion Aire.

PP
Jan 14, 2014, 05:53 PM
volare est vivere
ray foley's Avatar
hi there from Toledo

At present I am working on a full pedal gorilla winchable, aerotowable, flaps and aileron equipped Houston Hawk variant.

ciao -rjf
Jan 14, 2014, 06:26 PM
Registered User
A scratch built Grand Esprit .
Jan 14, 2014, 06:45 PM
Registered User
Any pictures?

Here are mine:

NEO:




Thermic (with flaps):



and this one shows the slight increase in EDA that I built for a bit more stability (stock version was said to have too little dihedral):

Last edited by DrewV; Jan 14, 2014 at 07:33 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion What's on your work bench, version 9981775 BHOFM Electric Plane Talk 10 Nov 01, 2015 06:49 PM
Question The annual "What's on your bench this winter?" question Steve85 Scale Kit/Scratch Built 39 Oct 31, 2013 07:13 PM
Discussion What's on your work bench????? Kimber Electric Plane Talk 59 Dec 06, 2012 09:00 AM
What's on your build bench right now? surfimp Slope 108 Dec 01, 2005 09:53 AM