Thread Tools
Dec 31, 2013, 02:34 AM
Registered User
Thread OP
New Product

RadioLink AT10 10CH remote control system


Color: Bright orange
Color:Classical grey
10 Channel receiver: R10D.

Features:
  • Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model,you can fly any model by this radio.
  • 3.5 inch colorful screen 320480 resolution,clear display menu and graphs.
  • Great control distance: 1.1km on the ground,2km in the sky.
  • Expansion feedback module,users can get plane details in real time.
  • Make very setting clear and exactly output result.
  • Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it.
  • High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.
  • Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology.
  • Unbelievable price, high quality as supper bland, and more exactly, faster response, higher resolution,one and the only one anti-jumping DSSS technology.really worthy to have it.


Technical Parameter:
  • Dimension:189.522cm;
  • Weight:0.95kg;
  • Frequency:2.4GHz ISM band(2400MHz~2485MHz);
  • Modulation mode:QSPK;
  • Channel bandwidth:5.0MHz;
  • Spread spectrum: DSSS;
  • Adjacent channel rejection:>38dBM;
  • Transmitter power: <100mW(PCB testing),
    <20dBm(3 meter air testing);
  • Operating Voltage:8.6~15V;
  • Operating Current:<95mA;
  • Control distance:800 meters ground;
  • Channel:10 Channel,8~10 channel are customizable;
  • Compatible model: Include all 120 degree and 90 degree swashplate helicopter,all fix wing and glider,five flying model;
  • Simulator model:under the simulator model the transmitter action turn off,change to power saving model;
  • Screen:16 colorful screen,size 7852mm,320*480 pixel.


  • Company: RadioLink Electronic Co.,Ltd
  • Introduce:RadioLink is a company specialised in rc solutions and rc radios about 10 years.we adhere to"Quality on the top" and wish to offer great and cost performance radio to rc enthusiasts.
  • Address: 3/F,Building 2, Fuguo industrial park, Kaifeng Road, Meilin, Shenzhen, Guangdong China
  • Contact: Alice
  • Tel:0755-88361717
  • Email:[email protected]
Certain discount is given on large QTY order!!!
Last edited by RadioLink; Jun 25, 2015 at 10:45 PM.
Sign up now
to remove ads between posts
Feb 19, 2014, 09:13 PM
Aircraft Addict
buddman36's Avatar

But really....How far can I Fly with this radio ??


[QUOTE=RadioLink;27043251] Color: Bright orange
Color:Classical grey
10 Channel receiver: R10D.

Features:
  • Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model,you can fly any model by this radio.
  • 3.5 inch colorful screen 320480 resolution,clear display menu and graphs.
  • Great control distance: 1.1km on the ground,2km in the sky.
  • Expansion feedback module,users can get plane details in real time.
  • Make very setting clear and exactly output result.
  • Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it.
  • High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.
  • Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology.
  • Unbelievable price, high quality as supper bland, and more exactly, faster response, higher resolution,one and the only one anti-jumping DSSS technology.really worthy to have it.


Technical Parameter:
  • Dimension:189.522cm;
  • Weight:0.95kg;
  • Frequency:2.4GHz ISM band(2400MHz~2485MHz);
  • Modulation mode:QSPK;
  • Channel bandwidth:5.0MHz;
  • Spread spectrum: DSSS;
  • Adjacent channel rejection:>38dBM;
  • Transmitter power: <100mW(PCB testing),
    <20dBm(3 meter air testing);
  • Operating Voltage:8.6~15V;
  • Operating Current:<95mA;
  • Control distance:800 meters ground;
  • Channel:10 Channel,8~10 channel are customizable;
  • Compatible model: Include all 120 degree and 90 degree swashplate helicopter,all fix wing and glider,five flying model;
  • Simulator model:under the simulator model the transmitter action turn off,change to power saving model;
  • Screen:16 colorful screen,size 7852mm,320*480 pixel.


  • Company: RadioLink Electronic Co.,Ltd
  • Introduce:RadioLink is a company specialised in rc solutions and rc radios about 10 years.we adhere to"Quality on the top" and wish to offer great and cost performance radio to rc enthusiasts.
  • Address: 3/F,Building 2, Fuguo industrial park, Kaifeng Road, Meilin, Shenzhen, Guangdong China
  • Contact: Jasmine
  • Tel:0755-88361717-838
  • Email:[email protected]
Certain discount is given on large QTY order!!![/QUOTE
Is this Radio really any good as far as Flying Distance and how are the Gimbals?? are they smooth with good Quad Bearings ?? are the switches nice and Fluid/Smooth or loose and clicky. I like the looks but ...I don't know ? I like to try different makes of R/C Gear but do not want to get it in my hands and say ...What did I DO !? Talk Me in to Buying this Radio PLEASE !! I do like the looks ! Cheers, Ralph
Mar 22, 2014, 08:11 PM
Registered User
VU2ATX's Avatar
Hi ! It is nice to see these. Have few queries;

1. Is the firmware open source ?

2. Is your transmitter cross compatible with other DSSS receivers of other brands ?

3. Is the receiver of this transmitter compatible with other brand DSSS transmitters ?

4. The receiver has four pin data port, what protocol it is ? How many sensors does the receiver support ?

5. Does your receiver has RSSI & PPM out ?
Last edited by VU2ATX; Mar 22, 2014 at 08:24 PM.
Apr 25, 2014, 08:43 PM
Registered User
It's a nice looking radio for sure, but with such little info available.... not really planning on buying it. It could be better than the Taranis for all we know... Anyone buy one for the heck of it?
Apr 26, 2014, 06:48 PM
Registered User
Wouldnt advise the purchase of this at all... It looks pretty but ZERO info on it, NO backing or reply from the company and I cant get it to work with the DJI Naza V2. Expensive to be sitting in the corner collecting dust, and very disapointing.
Jul 09, 2014, 04:29 AM
Registered User
Thread OP
more than 1.1 kms ground and 2 kms air
Jul 20, 2014, 11:47 AM
droneing is sexy
Hullabaloo's Avatar
Hey guys. Crashed my quad 2 times already because of signal lost. The distance is about 50-70 meters from home point and bang - no control, some flyaway and then crash...
What can I check within the transmitter and receiver?

Using stadnard PWM output.

This happens quite often, but most of the times I can regain control.
Sep 22, 2014, 05:22 AM
get to the chopper now !
tsooi's Avatar
Radiolink I am interested in this RadioLink AT9 2.4GHz 9CH. Can I use it with my Futaba FASST receivers, and Futaba FHSS ? You may answer in Chinese, if english is a problem.
Sep 28, 2014, 10:23 PM
Registered User
Thread OP
hi, thank you so much that you like our product.
I am sorry for our transmitters do not bind to other brand of receivers.
Sep 28, 2014, 10:27 PM
Registered User
Thread OP
1.It isn't the firmware open source.
2.3. Our receivers are not compatible with any other brands receivers and any other brand transmitters.
4.the protocol is IIX.
For sensors presently we have the extent voltage. Receiver voltage and signal strength is integrated. We are planning sensor for GPS, RMP and temperature in the coming month.
5.R10D is PWM signal out, R9D is SBUS and PWM signal, R6D is PPM and PWM signal.
6.It work Naza V2 DJI perfectly.
Last edited by RadioLink; Dec 09, 2015 at 05:31 AM.
Oct 22, 2014, 04:22 AM
Registered User
Dear Sir/Madam, Radio Link,

1. I refer to your above confirmation of provision of PPM port. Grateful if you could advise the servo port number of R10D which can provide combined PPM signal to have a singal cable connection to DJI NAZA M V2 Flight Controller.

2. Do you have a new R10D receiver to provide two antennas for diversity receiving to improve receiving performance?

3. Could we upgrade our existing single antenna R10D to two antenna system?

Many thanks for your kind attention and your prompt would be appreciated!
Oct 25, 2014, 05:15 PM
Registered User
RadioLink

Could you please advise how to bind the AT10 rx to tx? I couldnt find any instructions in the manual.
Oct 26, 2014, 09:24 AM
Registered User
1. turn on the transmitter first;
2. Please apply 5 volt. power to the receiver servo port 3;
3. After the receiver red LED is on, please use a small screwdriver or a ball pen to press the bind button for about 1 second until the red LED become flashing; and
4. If the red LED change to on without flashing, the receiver bind with the transmitter and they are ready to go.
For more details, please refer to the manual of RadioLink AT10 .
Oct 26, 2014, 09:30 AM
Registered User
RadioLink is looking to be disappeared.
Does anyone test or know whether RadioLink R10D receiver could provide a PPM signal from one of its 10 servo ports. If anyone know, grateful if you could advise the method to enable PPM and the servo port number of R10D which can provide a combined PPM signal to enable using a single servo signal cable connection to DJI NAZA M V2 Flight Controller instead of using 6 to 7 servo cables. Many thanks!
Oct 28, 2014, 09:54 PM
Registered User
Thread OP
Dear SUPER_DRONE,
Sorry for disappeared several days. :-)
1. Radiolink R10D receiver is provide a PWM signal.
2.R10D just have one antenna.
any questions please send me email: [email protected]
or with skype: alice-long90


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product RadioLink AT10 10CH remote control system RadioLink Product Announcements 4 May 09, 2019 06:30 AM