Any one have experience with Dare Design & Engineering A-10? - RC Groups
Thread Tools
Dec 15, 2001, 06:28 AM
Registered User

Any one have experience with Dare Design & Engineering A-10?

Since GWS A-10 is starting to look like a nogo in USA..thanks HH..anyone have experience with this little plane. their web site really doesnt tell you anything..hand launch, speed, etc. I dont own any edf and am looking for my first, and i want one that i can fly with GWS flite pack..since i have several [i know i will need better esc]. Just looking for any comment on product.


Sign up now
to remove ads between posts
Dec 15, 2001, 08:38 AM
Registered User
J Bergsmith's Avatar
ramw5p, cannot tell you how it flies, but I can tell you the design looks very nice and easy to build. I look at one the other day in the Hobby shop and it looks like it would be a nice flyer.
Dec 15, 2001, 05:34 PM
Registered User
Ed Waldrep's Avatar

Dare A-10

I remember there being lots of discussion of the micro A-10s about a year or so ago, but it's sort of died down since then.

Some important things to remember about the plane (I haven't built one myself but followed the discussions at the time):
1) The KP-44s must be set up in series, so on a 7 cell pack they each see about 3.5 volts. Some people were burning up the motors on 8 cell packs or maybe it was at the beginning of the run, hot off the charger when voltage is highest. The solution seemed to be a new motor. The Johnson 180 was disgussed but hard to come by. so someone started using the Kyosho DMC20BB motors and that seemed to fix the problem but the cell count had to be increased to 9 or 10 cells (600AEs or 500As). Go to, they sell this motor with the fan unit and call it the EDF200 Turbo. Dare also sells the fan unit for this plane, but the price in the hobby shop I saw was 40 bucks for one unit and motor. I'd go with the EJF (electric jet factory) option. Who wants to burn up motor after motor?

2) Don't remember if this was discussed much but a inlet lip of some sort would be a good idea on the fan, it would help increase thrust at low speeds. Some people were making a slit in fuel tubing and sliding it on the leading edge of the fan housing. You could also make one from balsa or foam, even built a whole nacelle.

I think flight speed was about 35 to 40 mph, maybe faster. I know that a Zagi hot off the charger on 8 x 600AEs does about 40mph.
Dec 16, 2001, 10:16 AM
jrb's Avatar
Check the videos on the Electric Jet Factory; has video for the Micro as well as the Mini and Large A-10s!