Thread Tools
This thread is privately moderated by taildragger1589, who may elect to delete unwanted replies.
Dec 29, 2013, 01:27 PM
Lookin' up at the centerline
taildragger1589's Avatar
Thread OP
Discussion

Bitty Stampe


This is the maiden flight of a Dollar Tree Foam Scratch built Stampe SV4B Scaled up from the 3 view on the plans of the Precedent Kit.
Had to work hard to slow her down!
BittyStampeMaiden (1 min 37 sec)


Video 2: Now very comfy with the old gal, as an odd coincidence, she likes Alice too.

BittyStampeAC (2 min 14 sec)
Last edited by taildragger1589; Feb 28, 2014 at 09:31 PM.
Sign up now
to remove ads between posts
Mar 07, 2014, 04:50 PM
Registered User
Very nicely done. A nice flying model.
Looks like you can get flat spins and tumbles with it, great.
Any build log or specs?
Thanks,
John
Mar 07, 2014, 05:04 PM
Lookin' up at the centerline
taildragger1589's Avatar
Thread OP
thanks, the build is in the middle of the scratch foamie thread and starts here:
https://www.rcgroups.com/forums/show...020909&page=84
Jan 21, 2017, 06:20 PM
Lookin' up at the centerline
taildragger1589's Avatar
Thread OP
A post mortem note.
At not quite 4 years of age, the Bitty Stampe fell from her ceiling hook and was irrepairably damaged.
Thinking about building a slightly larger version in a month or three.

Nick


Quick Reply
Message:
Thread Tools