Thread Tools
Old Dec 29, 2004, 06:11 PM
U812 is offline
Find More Posts by U812
Registered User
David. I need to see more pictures of the Seaview. Just excellent as usual and I didn't know it had an interior but it shouldn't surprize me.

Gilly is out of surgery and doing great. Just back from the hospital. Had 2 hours last night. Must take one of those little slices of death now.

Steve
Sign up now
to remove ads between posts
Old Dec 29, 2004, 06:34 PM
Merriman is offline
Find More Posts by Merriman
Suspended Account
Here's the complete SEAVIEW site:

http://www.culttvman.com/david_merri...__seaview.html

David D Merriman lll
Old Jan 01, 2005, 06:16 PM
Chris Clark is offline
Find More Posts by Chris Clark
Registered User

New to this forum!


Here's a modified UK Darnell hull that now has compressor ballast system etc etc.
Old Jan 01, 2005, 06:20 PM
Chris Clark is offline
Find More Posts by Chris Clark
Registered User
........................... and the only way to transport my 7' 2" long Surcouf.
This is a compressor ballasted system and has .22 blank firing main armament for added effect!
You get some strange looks on UK highways I can tell you!!!
Old Jan 01, 2005, 06:36 PM
U812 is offline
Find More Posts by U812
Registered User
Chris,

Very nice work! Is the Surcouf scratch built. You don't often see one of these.

You might want to check out this new film coming out:

http://www.507.jp/

http://www90.sakura.ne.jp/~evolution/WF2004_507.html

http://www90.sakura.ne.jp/~evolution...2004S_0003.jpg

Be sure to watch the trailer. Looks real good.

Steve
Old Jan 01, 2005, 06:49 PM
Chris Clark is offline
Find More Posts by Chris Clark
Registered User
The hull is one of three that I know of that were produced in the UK. The chap who did the moulding is not known to me. I believe it is the only one in existence in the UK though I am open to anyone telling me of others. I think I can say that no other in UK exists with the blank firing main guns! The hull is the only real 'commercial' piece with the rest being 'as you go along' so to speak.
It was originally set up for Freon gas operation from a refillable cylinder (de-canted from a large refigeration top up bottle) but due to costs originally, and then the banning of CFC's etc it was altered to a twin cylinder compressor (for smooth operation with opposed pistons) which was scratch built. A lovely beast when on the water but oh so easy to damage when moving from workshop to car. At 86" long you are looking at one end while blindly hitting the other on the workshop door!!!
Worth the grief and all the trimming hassle when on the water though!

Nice pic of 'her' on the latter site!
I want to know why Dr Robert Ballard and the Woods Hole Oceanographic Institute couldn't be persauded to find her, but having read James Rubridgers account of how he considers she was lost due to American B17 bombers (Who Sank Surcouf) and not her being struck by the feighter 'Thompson' might explain it!!!
Last edited by Chris Clark; Jan 01, 2005 at 06:55 PM.
Old Jan 01, 2005, 07:04 PM
U812 is offline
Find More Posts by U812
Registered User
Well she's a beauty. Well worth it all. Thanks for all the information Chris and happy sailing!

Steve
Old Jan 02, 2005, 07:15 AM
Chris Clark is offline
Find More Posts by Chris Clark
Registered User
I have just finished the module set-up for this 'aircraft' sub (today!). Now waiting for some warmer water to test it/trim it out etc!!!
Old Jan 05, 2005, 08:13 PM
expfcwintergreen is offline
Find More Posts by expfcwintergreen
expfcwintergreen's Avatar
Howdy,
New to this forum, been a SubComm member since '98. Attached are some pics of my 1/96 Seawolf. Currently have a Trumpeter Kilo, a Dumas Akula and another US Nuke on the ways.

Chris
Old Jan 05, 2005, 08:59 PM
U812 is offline
Find More Posts by U812
Registered User
Chris,

Welcome to E Zone. I'm also a member of SC. But started here first as I build and fly RC jets and planes as well.

Very nice Seawolf. Scratch built or kit?
Keep them coming.

Steve
Old Jan 05, 2005, 10:04 PM
expfcwintergreen is offline
Find More Posts by expfcwintergreen
expfcwintergreen's Avatar
Hi Steve,
Thanks! Familiar with some of your work from the EAM site, very nice!
My Seawolf is from ThorDesign, WTC is one of David M's 3.5 units, powered by a 12v 4.5 ahr. Currently looking to replace it with a homebuilt 3 inch RCABS style, probably powered by NiMH.

Chris
Old Jan 05, 2005, 10:11 PM
U812 is offline
Find More Posts by U812
Registered User
Thanks Chris. David's work is great. I have a bunch of parts for his WTC's here that will go in my scratch built Washington. Also 1/96th. Going to start on the hull tool next week. David has been a big help to me in my transition to subs.

Nice WTC you have there.

Steve
Old Jan 06, 2005, 05:19 PM
Chris Clark is offline
Find More Posts by Chris Clark
Registered User
I have this one set up at the moment as std. (with front planes operated by one servo and the rears by another). However, have had another 'play' with the the linkages so with some mixing they can be set as U/W 'ailerons' at a later date; that is if the sub works well to start with! I figure that it could all go wrong if one tries to take on too much before trimming is achieved correctly. Its only just been finished so waiting for warmer weather.
Old Jan 06, 2005, 07:26 PM
expfcwintergreen is offline
Find More Posts by expfcwintergreen
expfcwintergreen's Avatar
Hi Steve,
Have to agree, David's work is first-rate. He has also been a big help to me over the years. He's also not afraid to deal out a swift kick in the pants, if needed.

Just be careful with the praise, I'd hate to see him develop an ego...

Chris

(just kidding David, glad to be reading your posts again)
Old Jan 07, 2005, 03:41 AM
U812 is offline
Find More Posts by U812
Registered User
Quote:
Originally Posted by expfcwintergreen
Hi Steve,
Have to agree, David's work is first-rate. He has also been a big help to me over the years. He's also not afraid to deal out a swift kick in the pants, if needed.

Just be careful with the praise, I'd hate to see him develop an ego...

Chris

(just kidding David, glad to be reading your posts again)
LOL!!!!!

Steve


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Post your maiden Voyage "JetiPro" Lv2Fly Foamies (Kits) 1 Jul 08, 2008 02:00 PM
The Blue Frog - Post your pictures & Feedback here! Hippo Foamies (Kits) 496 Feb 06, 2004 12:40 AM
Post your ideas for The E Zone here jbourke Site Chat 68 May 17, 2002 10:54 AM
Post your inverted chopper pictures here for a kick !!! gmamo Electric Heli Talk 19 Apr 09, 2002 04:13 PM
Post your heli specs Dustin_v16 Electric Heli Talk 16 Feb 22, 2002 11:38 PM