Thread Tools
Dec 12, 2013, 08:19 AM
Thread OP
New Product

Foxtech Released the Kraken! K130 Folding 1300mm Octocopter


Hi, Guys,
Here we offer you an ideal heavy load multicopter platform, the Kraken 130.
This is a huge octocopter that can lift up to 14kg payload
or fly very long time with 3-4 kg payload.
Kraken 130 is designed by Foxtech which is an very ideal platform for heavy loading job and for 3 Axis gimbals.
All the arms are with 5 degree angle to the center plate which will guarantee a stable and high efficiency fly.
We installed a damper plate supported by 8 springs in the center plate to avoid vibration from the propeller and motor.
Not only the gimbal hanging below but the fly control will also benefit.

For using with 3 axis gimbal, all Kraken 130 is equipped with quiet and efficient automatic landing gear ,
so the landing gear will not show in the videos

We will also sell a compatible loading bars for most gimbal including DJI zenmuse, 5DII,5D3 and other standard gimbals.



Foxtech K130 V3 Presentation (10 min 24 sec)

When DJI Phantom Vision plus met Foxtech K130 V2 (With 16kg payload fly test) (4 min 15 sec)

K130 V2 U7 kv 420 COMBO(with 26kg load fly test ) (3 min 11 sec)


The Feedback videos from our customer
Kraken 1300 (2 min 28 sec)

Foxtech Kraken K130 load test (2 min 27 sec)


Final version of K130, READY for Shipping
we used better material(not from Tarot but it's compatible),the whole strength is further improved.















Where to buy:
K130 RTF&ARTF&Frame
http://www.foxtechfpv.com/foxtech-kr...ter-c-216.html
K130 V3 RTF U7 Combo
http://www.foxtechfpv.com/foxtech-k1...bo-p-1691.html


you can also follow up our Facebook, Twitter or Forum

facebook:http://www.facebook.com/pages/Foxtec...10304665734184
K130 Group on Facebook:https://www.facebook.com/groups/418023321720462/
twitter:https://twitter.com/FoxtechHobby1
forum:http://fpvlab.com/forums/forumdisplay.php?63-FoxtechFPV
Last edited by glassfox; Oct 21, 2015 at 12:09 AM. Reason: Update
Sign up now
to remove ads between posts
Dec 12, 2013, 08:57 AM
Registered User
Wow. Now that is a beast of craft.
Any info on approximate price?
Dec 12, 2013, 10:06 AM
Thread OP
Kraken 130 is a big frame ,so it may not be very cheap, but surely it will be much cheaper than a DJI S800 etc.
We will have preorder soon and preorders will be granted with good discount.
we will keep everyone informed.
thanks
Dec 12, 2013, 09:24 PM
Albuquerque USA
i like it. the motor mount and the arm mount is from the Tarot 810/960
Dec 12, 2013, 09:48 PM
Thread OP
The parameters are as follow:
max propeller size: 18 inch
Motor: 5008,5010,5210,6008,
suggested KV value: KV 300- 330
Max payload including battery: 15 kg with 6008 motor
body weight inlcuding landing gear: 4.5kg
Dec 12, 2013, 09:49 PM
Registered User
This is good. Very good. Can it be bought without motors?
Dec 12, 2013, 11:51 PM
Thread OP
of course, it can be sold as frame ,but the quantity is very limited.
we suggest to buy the whole set for best efficiency.
we will test all setup and choose a best suitable one.
thanks
Dec 13, 2013, 12:32 AM
Albuquerque USA
it available to buy now?? i ask doris she said it not ready. I would like to review it. if you review your own product lol technically it not a review more of a show case of a new product

This is good for my Octo since i still have part to build my finish my octo i take this instead of the none fold that i have.
Dec 13, 2013, 01:38 AM
Registered User
chuenwe's Avatar
Hope you don't still using the plastic balls to "hang" stuff under it. Nobody is going to have thousands of dollars of equipment just hang by the balls. They are suppose to be used as compression. You carry Tarot's Shock Absorber Assembly For 3 Axis Camera Mount as well. Look at how it suppose to be done please.
Dec 13, 2013, 02:50 AM
Thread OP
no, those balls are part of the Eagle eye 5D2 gimbal, has nothing to do with Kraken 130
Dec 13, 2013, 03:59 AM
Registered User
koolkiwikat's Avatar
Quote:
Originally Posted by chuenwe
Hope you don't still using the plastic balls to "hang" stuff under it. Nobody is going to have thousands of dollars of equipment just hang by the balls. They are suppose to be used as compression. You carry Tarot's Shock Absorber Assembly For 3 Axis Camera Mount as well. Look at how it suppose to be done please.
Looking at the picture it looks like a ball hanging situation.....back to the drawing board or its a epic fail!
Dec 13, 2013, 04:39 AM
Thread OP
haha , balls are not part of Kraken ,it's for testing the eagle eye gimbals
Dec 13, 2013, 05:01 AM
Albuquerque USA
Fu can you sell me one of this octo so I can do a testing and review might as well getting the eagle eyes from you too let me know
Dec 13, 2013, 07:45 AM
Thread OP
please contact us around 10 days later, I think it's very possible.
The final version will contain no tarot parts , same design but improved quality.
including improved arm strength, new motor mount that adapts more motors etc
So you will love it.
we will continue to test this frame to get the best power combination
Dec 13, 2013, 10:50 AM
Registered User
vbee's Avatar
4.5kg just for frame + landing gear?


Quick Reply
Message:

Thread Tools