4x SunnySky X2216 KV880 II motors - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by RDTague, who may elect to delete unwanted replies.
Dec 04, 2013, 05:52 PM
Trader Rating: 5
Registered User
RDTague's Avatar

4x SunnySky X2216 KV880 II motors

Here are 4 SunnySky X2216 KV880 II motors. I purchased a bunch of these for various 450, 450+, X8, 550, and 550+ builds. I have since moved on to "big prop/ super low KV" builds and these are just laying around the bench.

The right 2 are brand new, complete with bullets. The left 2 were used as spares in an X8 build, hence the shaft ends removed. Also, the bullets are removed on these 2 motors, as I direct solder my motors. I can throw the bullets in, if you want them.

These are AWESOME motors as replacement motors to the cheap and cheesey stock 920kv DJI motors. With these motors, you can safely use 4S and 10" props, with NO worries of over heating. In fact, I'm currently using these on my 550+ craft on 4S spinning 12" APC's. Motor temps run about 125F in the summer.

$80.00 + 2.95 s/h to CONUS only.

Name: IMG_1647.jpg
Views: 141
Size: 237.3 KB

Here's what SS says about them:

SunnySky brushless motors are made of quality components that are normally only seen in high end products, and are designed to give years of high performance. Every motor has been carefully balanced and tested in the factory.

All SunnySky motors are covered by two year limited warranty.

Every motor comes with a cross type mount and a propeller adaptor as shown in the following photos.


Durable Japanese NMB ball bearings

Efficient Japanese Kawasaki stator steels

Rare earth neodymium magnets stable up to 180 OC

Polyesterimide enameled oxygen free copper wires that work up to 180 OC

CNC machined and anodized aluminum case

Laser-engraved motor model and KV number

Soft silicone wire leads

Patented balance techniques


Stator Diameter .......... 22 mm

Stator Height..............16 mm

Outside Diameter ..........28 mm

Body Length ...............32 mm

Shaft Diameter ............3.17 mm

Motor Kv ..................880 RPM / Volt

Motor Weight ..............68 g

Accesory Weight...........13 g
Sign up now
to remove ads between posts
Dec 04, 2013, 07:31 PM
Trader Rating: 5
Registered User
RDTague's Avatar
Last edited by RDTague; Dec 05, 2013 at 10:17 AM.

Thread Tools