New Products Flash Sale
Thread Tools
Old Apr 30, 2001, 05:47 PM
Cash Traylor is offline
Find More Posts by Cash Traylor
Senior Member

Anyone know a source for 3 inch plastic spinners?


I'm looking for a source for 3.5 inch "all plastic" spinners. I have a 1/7th scale mustang and I want a black spinner, but need a 3.5 inch (89 mm) one for the cowl to look right. The problem is that I can only find spinners designed primarily for gas operation at this size (at least locally). They are either a plastic or nylon fiber reinforced cone with a thick aluminum backplate. These are heavier than I care for, and I don't need that with electric (no power stroke to deal with) and I don't need "flywheel effect."

Anyone know a source (or even if they might exist) for large (above 3 inches) plastic spinners, please post a link or contact info.

Thanks!
Cash
Sign up now
to remove ads between posts
Old Apr 30, 2001, 06:23 PM
leccyflyer is offline
Find More Posts by leccyflyer
Sloping off....
leccyflyer's Avatar
Hi Cash

Radio-Active spinners are distributed to most UK model shops and have a fairly wide range of large plastic spinners- including a rather evilly extended nice fighter-ish one at about 3.5 inch diameter that I wish I could get in a smaller size.

A quick google search revealed
http://www.modellers-supplies.co.uk/...Active_44.html

as a supplier - but their website unfortunately has no pictures of the spinners themselves apparently.

The Flair website does however have some pictures - including their 3.5" spinner at
http://www.flairproducts.co.uk/

Carl Goldberg used to do nice plastic spinners with plastic backplates in moderate sizes - at least 2.5" if not bigger so they are worth a look as well.

Good luck with the spinner hunt

cheers

Brian

Old Apr 30, 2001, 07:43 PM
sf_247 is offline
Find More Posts by sf_247
Registered User
Tower Hobbies replacement spinner for Top Flite Spitfire plane
http://www2.towerhobbies.com/cgi-bin...1&I=LXHY60&P=7
Old Apr 30, 2001, 10:11 PM
Cash Traylor is offline
Find More Posts by Cash Traylor
Senior Member
Great! Thanks!

-Cash


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Anyone know of a source for mini bus bars? Kmot Dock Talk 6 Oct 29, 2006 06:59 PM
Does anyone know of a source for a precut firewall? xray328 SPAD - Simple Plastic Airplane Designs 8 Nov 02, 2005 10:25 PM
Anyone know a source for Canopies? surfdog4 Foamies (Kits) 7 Mar 08, 2003 03:32 PM
Anyone know a source for Gulfstream Kit or ARF? Cash Traylor Electric Ducted Fan Jet Talk 3 May 10, 2001 10:00 AM