Thread Tools
This thread is privately moderated by Littlescreamers, who may elect to delete unwanted replies.
Old Jul 08, 2004, 07:22 AM
Phildc is offline
Find More Posts by Phildc
Registered User

JDM-Nivelles: 30 km south of Brussels Belgium


That's for the geographical location.
On the website of this RC model plane/glider club

JDM-Nivelles

you will find the following in 'Articles' with download links
Don't be afraid, 'Articles' are in french, but contain links to the downloads
that are available in English and french. Docs contain a lot of PC screen shots and all instructions and references.
All topics related to PC ( Windows )software related to RC model

(simple)PCM project:
- a PIC cable for FMS simulator under ALL Windows versions
- GLIDER: PC software using the previous cable: shows your transmitter
signals by moving a glider/plane in real time: easy to set-up mixers,..
- ANALYSER: shows all xmtr channels, and one channel in detail, with
servo geometry and graphic calculator - uses same cable
view microseconds, angle, percent..
- RECORDER, VIEWER: to record and replay a real or simulated flight (view
up to 12 channels, with ALL info sent)
- RS232 ANALYSER: shows PCM codes on the cable, and RS232 signals in
general
- other research activities

JOYSTICK: view signal, add trim, expo, travel limits, like on a real RC transmitter. Very nice with FMS.

AUDIO LOST PLANE BEACON, FINDER, LOCATOR: as it says

ON/OFF OUTPUTS ON A RECEIVER : control of an onboard digital camera, or other functions (ongoing, ref rcgroups DIY CoolPix PC RC RS232)


All documents are available in English and French on the website.
All softwares are FREEWARE and downloadable on the website.

Come and see us at our 2004 Air Show.There is a first prize for visitors: 940Euro plane+transmitter+... All info on the website.

Philippe
Brussels / Bruxelles / Brussel Belgium
French keywords: modelisme avion perdu émetteur simulateur
Last edited by Phildc; Jul 08, 2004 at 08:04 AM.
Sign up now
to remove ads between posts
Old Jul 27, 2004, 03:16 AM
iti20090 is offline
Find More Posts by iti20090
Registered User

Nicad discharger circuit


Hi folks

For a change of pace from RC Soaring where my cheapie Hitech G325 fast charger was ample, I am looking at dabling in some Tamiya Mini 6 cell (1700ma micad) racing. I never did ever get the efficiency discharge things on the G325 charger to function sensibly so am looking for a circuit to discharge the cells to safe limits tween the races etc.

Any leads would be appreciated.

Thanks
Dave Greer
Old Aug 27, 2004, 05:55 AM
Warren2008 is offline
Find More Posts by Warren2008
RC_hobby
Hello Everybody,

We are very pleased to get the opportunity to contact you at the moment, thanks a lot for your much working!

First of all, I would like to give a brief self-introduction for you. Our company is a Chinese supplier which is specializes in manufacturing and exporting all kinds of toys for a few years. Especially the high quality toys as Radio Control Toys and Hobby Products. I would like you to take a minute to browse our website( http://www.gr-exp.com ) to know more about us. I would like to offer a price list of our products for you, but please inform me the products items or products name which is your requirements,Then we will provide further information for your reference.

Due to our high quality products, competitive prices, and excellent service, our products have sold well in a variety of markets worldwide. We wishes to meet your requirements and exceed you expectations. If you are interested in any of our products, please do not hesitate to contact us. We look forward to your inquiries and orders in the near future.

I would really appreciate for your cooperation and your kind help!

Best regards!

Yours Truly,
Warren
Old Aug 27, 2004, 06:03 AM
arx_n_sparx is offline
Find More Posts by arx_n_sparx
Dismembered Member...
arx_n_sparx's Avatar
.....
Last edited by arx_n_sparx; Aug 31, 2004 at 11:02 PM. Reason: wrong thread
Old Sep 17, 2004, 03:14 AM
iti20090 is offline
Find More Posts by iti20090
Registered User
Thank you Phillipe

Regards
Dave
Old Sep 21, 2004, 06:12 AM
eagleco is offline
Find More Posts by eagleco
Registered User

reciever FM


Many hanks

But I need direct links url.... on FM receiver
Old Oct 14, 2004, 02:10 AM
tve is offline
tve
Find More Posts by tve
tve
Registered User
http://zingerpropeller.com/4_bladed_propeller.htm some pretty cool props!
http://www.apcprop.com/cgi-bin/store/agora.cgi some more pretty cool props!
http://www.geocities.com/BourbonStre...rvobasics.html good docs on servo signals
Old Oct 23, 2004, 02:32 AM
clipclop is offline
Find More Posts by clipclop
Registered User
Heres several online books on , Pic mocrocontrollers , 8051,PLC controllers , radio receivers and components .
http://www.mikroelektronika.co.yu/english/index.htm
Stewart
Old Oct 23, 2004, 07:03 AM
Phildc is offline
Find More Posts by Phildc
Registered User
Quote:
Originally Posted by Phildc
That's for the geographical location.
On the website of this RC model plane/glider club

JDM-Nivelles

you will find the following in 'Articles' with download links
Don't be afraid, 'Articles' are in french, but contain links to the downloads
that are available in English and french. Docs contain a lot of PC screen shots and all instructions and references.
All topics related to PC ( Windows )software related to RC model

(simple)PCM project:
- a PIC cable for FMS simulator under ALL Windows versions
- GLIDER: PC software using the previous cable: shows your transmitter
signals by moving a glider/plane in real time: easy to set-up mixers,..
- ANALYSER: shows all xmtr channels, and one channel in detail, with
servo geometry and graphic calculator - uses same cable
view microseconds, angle, percent..
- RECORDER, VIEWER: to record and replay a real or simulated flight (view
up to 12 channels, with ALL info sent)
- RS232 ANALYSER: shows PCM codes on the cable, and RS232 signals in
general
- other research activities

JOYSTICK: view signal, add trim, expo, travel limits, like on a real RC transmitter. Very nice with FMS.

AUDIO LOST PLANE BEACON, FINDER, LOCATOR: as it says

ON/OFF OUTPUTS ON A RECEIVER : control of an onboard digital camera, or other functions (ongoing, ref rcgroups DIY CoolPix PC RC RS232)


All documents are available in English and French on the website.
All softwares are FREEWARE and downloadable on the website.

Come and see us at our 2004 Air Show.There is a first prize for visitors: 940Euro plane+transmitter+... All info on the website.

Philippe
Brussels / Bruxelles / Brussel Belgium
French keywords: modelisme avion perdu émetteur simulateur
And a real-time HELICO mixers viewer (beta-test version):
http://www.jdm-nivelles.be/fichiers/fms/Helico.exe

Remainder: the Analyser that is also a servo link graphic calculator:
http://www.jdm-nivelles.be/fichiers/fms/Analyser3.exe

and the plane/glider viewer:
http://www.jdm-nivelles.be/fichiers/fms/Glider.exe

All the downloads (and user's guide in English):
http://www.jdm-nivelles.be/fichiers/fms/SPCMliste.htm

Philippe
Brussels Belgium
Old Oct 27, 2004, 09:29 AM
ilufa is offline
Find More Posts by ilufa
Registered User
Multipurpose Tester, functions include tachometer, servo tester, speed controller tester, Tx-Rx tester

http://www.geocities.com/ilufa/index_eng.htm
Old Oct 27, 2004, 05:29 PM
slopedog is offline
Find More Posts by slopedog
Registered User
slopedog's Avatar
Great place for kits gears and servo parts.

http://www.robotzone.com/customer/home.php
Old Nov 04, 2004, 05:21 PM
Malc C is offline
Find More Posts by Malc C
Registered User
Guys

Don't visit the modeltronics site - http://www.modeltronics.bravepages.com/

Its full of spyware and has a nasty trojen virus scripted in to it !
Old Dec 29, 2004, 04:04 AM
bertvk is offline
Find More Posts by bertvk
Registered User
Malc did not make a joke, it really is full of junk. Pop ups and Gain installation galore. My PC setup is very secure, so I did the test so you don't have to.
Old Dec 29, 2004, 09:35 AM
Phildc is offline
Find More Posts by Phildc
Registered User
Quote:
Originally Posted by Phildc
And a real-time HELICO mixers viewer (beta-test version):
http://www.jdm-nivelles.be/fichiers/fms/Helico.exe

Remainder: the Analyser that is also a servo link graphic calculator:
http://www.jdm-nivelles.be/fichiers/fms/Analyser3.exe

and the plane/glider viewer:
http://www.jdm-nivelles.be/fichiers/fms/Glider.exe

All the downloads (and user's guide in English):
http://www.jdm-nivelles.be/fichiers/fms/SPCMliste.htm

Philippe
Brussels Belgium
The Analyser now also accepts a simple shielded cable from the transmitter PPM signal to the PC mike (audio) input:
http://www.jdm-nivelles.be/fichiers/fms/Analyser31.exe

Select interface=audio, and simply do 'MONITOR'

Enjoy!
Philippe
Brussels Belgium
Old Jan 10, 2005, 03:54 AM
lombardp is offline
Find More Posts by lombardp
Registered User
Hi,

I and two my colleague have just opened a website where we are documenting our original electronic projects for models in general. At present we have completed the documentation (from pcb and circuit diagrams to PIC source code, everything is available for free) for some custom battery chargers.

http://www.seven-segments.com


Thread Tools