Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Feb 18, 2004, 02:09 PM
skyhawk is offline
Find More Posts by skyhawk
A-4 nut!!
skyhawk's Avatar
Your biggest problem is your batteries. At 400 mah They are too small and will not deliver enough current to the motors. You need some HE 1000 or Kan 900's. Talk to A10driver, We just got his going and he is using Kan 650's. Use 8 cells and.............DO NOT add weight to the plane. If you must balance shift the battery pack. Even with the bigger motors - you still must account for every ounce of weight.
Sign up now
to remove ads between posts
Old Feb 18, 2004, 02:12 PM
skyhawk is offline
Find More Posts by skyhawk
A-4 nut!!
skyhawk's Avatar
Oh yea,
One more thing. If you can.....ditch the gear. You would be suprised at how much drag they actually add. You would also be getting rid of some extra weight. If you only have pavement - it should still work. But you really need new batteries.
Old Feb 19, 2004, 05:39 AM
tony209 is offline
Find More Posts by tony209
Registered User
Thanks Skyhawk, always thought the batteries were going to be a problem.
Heres a pic of the finished model
Old Feb 19, 2004, 06:03 AM
Pjotrrr is offline
Find More Posts by Pjotrrr
Me likes Depron...
Pjotrrr's Avatar
My Brother's A-10 flies very well on 3s2p Irate 850's with the EDF-55/300H's, the lipo's are in front of the batteryhatch for a good CG without adding weight, full power is only used in short bursts to endure motorlife...
Handlaunching standing still is easy, you just give it a light throw and it flies straight out of your hand...
Use the lightest RX and servo's and lipo's and you will have a perfect plane
(No landing gear; landings on grass)

Peter
Old Feb 19, 2004, 07:48 AM
A10driver is offline
Find More Posts by A10driver
Registered User
HI tony

you made a nice paint job on your plane i like it
i have got to paint mine yet i fly mine before i paint them
in case i have to make mods my A10 flys just great with
8 KAN 650s but i onley get 6 min out of it i am going
to put 1050 KANS in trond uses 950s and gets 10 mins
he sent me pics on my thread but we carnt get 950 s
i carnt get any overlander dont sell them look at my last
2 pics you see how it flys i had to hand launch it our
field is still wet you get bigger batts and it

WILL FLY

good luck A 10 DRIVER
Old Feb 19, 2004, 09:46 AM
Guyffon is offline
Find More Posts by Guyffon
Registered User
If you guys are willing, go for dual astro microfans. I have them in my 1st plane and it could ROG even at 660 grams.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Is my GWS A-10 with EDF-55 fans too heavy? Darn Servo ! Electric Ducted Fan Jet Talk 17 Jun 09, 2008 05:19 PM
For Sale GWS A-10 with EDF 55 Grey paint MattVernon Aircraft - Electric - Airplanes (FS/W) 0 Feb 13, 2006 11:10 PM
GWS A-10 with EDF-55s...worth it..? chrisw Electric Ducted Fan Jet Talk 4 Jan 12, 2004 04:40 PM
GWS A10-with EDF 55's a bit heavy. CooLJ92 Parkflyers 13 Nov 04, 2003 04:24 PM
FS: NIB GWS A-10 w/ EDF 55 motors PDX Slope Pilot Aircraft - Electric - Airplanes (FS/W) 8 Oct 23, 2003 11:22 PM