recommender kit (you dont need the FPV)
4 x tiger MT1306:
4 x SimonK 6A ESC's:
multiwii flip 1.5 flight controller (order with pins)
male to male servo leads:
with FPV I recommend a biger battery such as a 1600 2cell:
Cheaper alternatives, suggested but not tested,
ZMR 1804 http://www.myrcmart.com/zmr-1804-240...se-p-6281.html
Turnigy 1811- http://hobbyking.com/hobbyking/store...er_2900kv.html
A1510 Suppo http://www.altitudehobbies.com/brush...kv-suppo-a1510
Turnigy sk3 2118 3100kv
Hobby King 6amp http://www.hobbyking.com/hobbyking/s...0_5A_UBEC.html (These can be flashed with the latest Simonk firmware)
Thanks for the recommendations guys!
Okay guys, Instead of loading up the ecks thread even more, this thread is dedicated to the new Carbon Fibre sandwiched ecks frame. Ive been getting a lot of requests for a smaller frame, and after spotting the mt1306 motors from tiger motor, I am also interested in trying them out.
This frame will be 230mm allowing for 6 inch props, the tiger mt1306 are 3100kv, so this will be an amazingly fast machine.
Frame is in design stages but will hopefully be cut very soon. Chris from Armattan is helping me find a cuting source away from Sweden to keep costs a little lower.
For the guys that want me to build, tell me what electronics you want, and I will work out a price.
I solder all cables, No Bullets, solder esc's together instead of power distribution board, and solder battery beeper (its got a name but cant remember) direct to KK2, along with voltage wire. I like to keep my builds as light as possible.
A: its faster
B: very hard to break a light machine.
You can email me at email@example.com
here is the design (I guess you recognise it already, but it has been modified a little for smaller motors 12x12 and 12.4x12.4 and adding a battery strap.
Last edited by ecks; Nov 04, 2013 at 01:27 PM.