Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by Bud Morrison, who may elect to delete unwanted replies.
Jul 09, 2004, 01:40 AM
GO THE DOLPHIN!
ndflicks's Avatar
Here's one, a Ucan2 by Neofun/Norvel. Powered by a Norvel .061. AUW 24oz, 41" WS. Supposed to be a low wing trainer, but it's a nerve wracker(could be the insane throws) lol. Rolls quick, maybe 1.5/second... and loops tight enough to clip the tail with the prop... well, almost...

Next is a highwing built from the same wing/tailfeathers after the pvc turtle deck let go of the tail while rolling... That was my big complaing, it was always brittle from the nitro and sun. Scratchbuilt fuse, and with the rates tamed down, has been proving a decent trainer for my wife.

Last, another Norvel, this time a .049 being used on a 66" glider that was made for sp400 geared. I had the engine and figured... why not? I'm so glad I did it, it climbs really well, underpower will do rudder rolls and great loops. Cut the engine and glides forever. AUW 25.5oz.

I have a Watt-age Crazy 8 that will likely end up with the .061 once the Ucan2 hybrid dies, and am building an Estes Astro Blaster for Cox .049.

Love the thread(s)!

Bill
Sign up now
to remove ads between posts
Aug 29, 2004, 08:54 PM
Registered User

Two new planes for me.


The first plane is a Simple Series Cub built from RCM plan # 946, it has a AP .061 engine. I replaced the 6x3 MAS prop with a Cox 5x3, It is rudder, elevator and engine control. Very stable and easy flyer.
Maiden flight 8-29-04

The second plane shown is a 1/2 A SST built from a out of producion kit, it has a .049 Big Mig Norvel for power. 5x3 cox prop, turns 16,500, two channel Futaba radio with ailerons and elevator.This plane was built by Brent Shank.
Very quick for a .049.
Maiden flight 8-22-04
Last edited by Lynn S; Oct 08, 2004 at 09:43 PM.
Aug 29, 2004, 10:09 PM
Registered User
Bipe Flier's Avatar
Rascal 27 built from Top Flite plans.

7.5oz
3 channels - rudder/elevator/throttle
Cox TeeDee .020 with throttle sleeve from a PeeWee

It flies great!
Sep 29, 2004, 02:54 AM
Registered User

Firecat Glow !


Hi,

this is my conversion for a Wipa Firecat, 100 grams saved compared with (previous) electric setup!
It' hasn't flown yet, hope it will...



(attachment resized...)
Last edited by fabio; Sep 29, 2004 at 04:37 AM.
Oct 08, 2004, 02:25 PM
Registered User
ultralajt's Avatar

My COX 049 aerobat


Hi!

I made this little aerobat by my own plans. It flies great. It would be better even if I somehow manage to made some kind of throttle control (exhaust sleeve??)

Can anybody give me a hint, or better explanation for this throttle control on babe bee engine and how is made.

Regards!
Mitja
Oct 08, 2004, 03:45 PM
Registered User
putt_13's Avatar
Hello,
There is a TON of information on throttle sleeves, etc on RCUniverse. Its the best website for nitro powered model airplanes. 1/2a Forum That is the 1/2A forum...you will find everything you ever wanted to know about small nitro engines there. Hope this helps. -Patrick
Oct 09, 2004, 07:42 AM
Registered User
ultralajt's Avatar
Thanks Patrick!

Yes, I use a SEARCH option and really find out a lot of useful information. The reading were informing to that point, that I now believe that I can make it by myself, using all gathered informations..

Mitja
Oct 09, 2004, 10:01 AM
Registered User
putt_13's Avatar
No problem. I knew you would enjoy the site. -Patrick
Oct 09, 2004, 10:42 AM
Registered User
Bud Morrison's Avatar
Actually that info can be found here as well and you dont have wade through tons of advertising to view it.

https://www.rcgroups.com/forums/show...rottle+sleeves

https://www.rcgroups.com/forums/show...ghlight=sleeve
Oct 11, 2004, 10:20 PM
Registered User
molchaser's Avatar

E Starter


100% stock with 800 ma nimh. Nice sport flyer

OOPS....This is obviously not a 1/2A

Sorry...Please delete or relocate as appropiate
Last edited by molchaser; Oct 11, 2004 at 11:06 PM.
Oct 11, 2004, 10:38 PM
Registered User
molchaser's Avatar

Almost a Schoolgirl


This is one of two planes built at my club that were inspired from the old Ken Willard Schoolgirl plans.

It features the school girl outlines and was modernized as follows:
Homemade fiberglas fuse
Homemade Carbon fiber landing gear
Home made Foam wings with aileron in upper wing and no dihedral
Semi semtrical airfoil in lieu of flat bottom
Bolt on wings
.074 Norvel R/C

All in all it is nice flyer, however I had expected better inverted performance with the semi semtrical airfoil than I am getting...may be the rudder is too "shaded" by the fuse...will not do an outside loop
Last edited by molchaser; Oct 11, 2004 at 10:45 PM.
Nov 15, 2004, 09:17 AM
never fast enough !!!
wojtek's Avatar
here is a ACE ultimate biplane I built for my 3 year old son .. He likes spiderman, so spiderman it was ... Spiderman is also the pilot .. (ill try to get a pic of that later .) power is from a tiny TT .10 (for me this is tyny, as mostly i like to fly jets and overpowered prop jobs)

The little 10 took this thing off of grass, and also rolled out to a nice landing on it ,,, its a fun little plane ..


Wojtek
Nov 22, 2004, 11:35 AM
GO THE DOLPHIN!
ndflicks's Avatar
Nice spidey-bipe!

Had a wattage hawk lying around that wasn't fun anymore on sp400. Shoehorned a norvel 061 ame in the nose and VOILA! 400w/lb!!!

AUW 10oz, est. speed out of a short dive and across the runway around 100mph+. HOOT to fly.
Nov 27, 2004, 06:05 AM
Registered User

EE Lightning


This is my baby bee powered ducted fan English Electric Lightning F3 made from the nexus free flight plan . Have not yet flown it waiting for better weather.
Last edited by tubalan; Nov 27, 2004 at 06:36 AM.
Nov 27, 2004, 01:16 PM
1/2a Flyer!

Latest 1/2a


Here is the latest one built, 36" span. Hot rod Cox Medallion .049.
4 servos, first flew 11/25/04. Decal says Hat Trick, so thats the name of her.
Last edited by Remby; Nov 27, 2004 at 01:24 PM. Reason: No picture


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Gallery Post your 1/2A pics Tony Oliver 1/2A Planes 134 Feb 14, 2004 06:34 AM
Post Your Zagi 400X Pics Here HavingFun2002 Foamies (Kits) 63 Feb 02, 2003 01:21 AM
Post your Aeroflakes meet pics here Jgardner Scratchbuilt Indoor and Micro Models 38 Jan 24, 2003 03:44 PM
Post your fun fly pics here. Paul Susbauer 3D / Fun Fly Fuel Planes 8 Jan 23, 2003 03:11 AM
Post Your Corona Building Pics cactus Electric Heli Talk 27 Jun 05, 2002 08:34 AM